Stainless Works long tubes to fit 2003-2006 4WD(and possibly 99-02 with EGR delete). Includes ORY. There is about a 12" slip fit straight section of the ORY that needs to be replaced as it did not want to cooperate on disassembly(goes where the pass side cat would be in the catted system). SOLD

 

what size primaries/collectors...pics of ORY....

 

PM sent

 

1 3/4" primaries, 2 1/2" collectors. Have not cleaned up the ORY, but it is solid. The piece circled in the pic is the one I was talking about. The dimple from the clamp locked it to the collector- didn't want to damage the header so I just cut that short piece to get everything out easier.

Anyone know if there are different clearance issues with 99-02 trucks? In the pics on SW's site the difference between the the 99-02 and 03-06 4WD headers appears to be only the EGR tube. So it looks like these would also fit a 99-02 with EGR delete.

 

does it matter if i have a 2wd??? i have no d shaft so would they fit??

 

My mistake. Looking at the SW site again, these look like they are also identical to the 99-02 headers, other than no EGR tube.

Not sure about 2WD fitment. My guess is that the 2WD headers hug the block more than the 4WD. i.e. these may fit a 2WD truck, but the 2WD headers wouldn't fit a 4WD.

 

care to sell just the headers?

 

These are sold.