I just had a valve job done on the heads I bought from sunset orange, they tested these springs and they checked out good. Problem is the cam I ended up with will need more, so im installing new double springs. I have one head done now, just need to take the springs and retainers off the 2nd head(tommorow most likely) and they will be ready to ship.

This is only for the springs and titanium retainers.

Looking to get 200 shipped for them. Unknown mileage, but as stated above, they were just checked by machien shop when the valve job was done and they said they are good to use. These springs are rated by mfg to .600" lift.

-Lurius

 

ttt!

They are boxed and ready to ship! I finished removing them off the 2nd head today and boxed them up, very clean!

-Lurius

 

Im back in town and can ship as early as tommorow.

-Lurius

 

Is your time in your sig with the nitrous or without? Sorry about being off topic but free bump anyway...

 

It was with the nitrous lol, sadly I made a few mistakes. I still had the truck in normal mode, dident push the tow haul mode(reprogrammed by Charlie Wheatley for 0% TM and higher shift points). As well as being generally new to racing, and making mistakes.

-Lurius

 

Still up for sale.

-Lurius

 

would you sell jsut the ti retainers?

 

Really looking to sell them as a package, sorry.

-Lurius

 

are those springs and retainers still available? i would be very interested in purchasing them.

 

May be, I had an offer about an hour before your post here. If it falls through I will let you know.

-Lurius