***PRISTINE 6.0L Parts***
06-09-2008, 08:56 AM
#1
***PRISTINE 6.0L Parts***
I have some really nice 6.0L parts.
-Special short skirt Lq4 pistons with pieces of rings.
-Custom "S" rods, broken beam style.
-Oil pan, tray, and pickup(ventilated sump style)
-Open chamber head.
-Custom ISKY turbo cam (need to be welded back together)
-STD 6.0L block (needs 3 sleeves, hole in side, and pan rail repaired)
-Set of 11 bent pushrods
-truck style linkless timing chain.
-6.0L crank with two good journals.
-Special short skirt Lq4 pistons with pieces of rings.
-Custom "S" rods, broken beam style.
-Oil pan, tray, and pickup(ventilated sump style)
-Open chamber head.
-Custom ISKY turbo cam (need to be welded back together)
-STD 6.0L block (needs 3 sleeves, hole in side, and pan rail repaired)
-Set of 11 bent pushrods
-truck style linkless timing chain.
-6.0L crank with two good journals.
06-09-2008, 09:16 AM
#3
Other than being .100'' down in the whole looks ok. None of the ring lands on the pistons still left show any sign of detination. Bearings look like new. The rods just shortend until failure, I suspected something was going on fo some time. I had low compression on a few holes, but no blowby.
06-09-2008, 09:47 AM
#4
12 Second Truck Club
iTrader: (3)
Join Date: Feb 2006
Location: Baton Rouge
Posts: 1,457
Likes: 0
Received 0 Likes
on
0 Posts
Looks like a perfect opportunity for a 2 year build and 2000 post thread.
Seriously, Sorry to hear 'bout that... what's the plan? What were you doing when she let go?
Seriously, Sorry to hear 'bout that... what's the plan? What were you doing when she let go?
Last edited by BigCountryx; 06-09-2008 at 09:52 AM.
