5.3 dyno results with tr220 cam
03-31-2009, 11:37 PM
#1
Staging Lane
Thread Starter
Join Date: Sep 2006
Location: Houston/Katy
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
5.3 dyno results with tr220 cam
This is a buddy's truck.. He had a ls1 hot cam pile cam that made
331 hp 316tq
Put a TR220 cam in and made with just the cam change 350 hp and 353 tq
mods
2004 gmc ext cab 2wd 80,000 miles
ASP PULLEY
S&B lid
tr220 cam
B&B catback
stock heads stock longblock
Pacesetter headers/Ypipe (no cats)
Trailblazer convertor
ported tb
on 20inch SS wheels
Tuned by Owen Priest from ARD.. Thanks Owen!!
HOT CAM DYNO SHEET.. SAME DYNO SAME TUNER
331 hp 316tq
Put a TR220 cam in and made with just the cam change 350 hp and 353 tq
mods
2004 gmc ext cab 2wd 80,000 miles
ASP PULLEY
S&B lid
tr220 cam
B&B catback
stock heads stock longblock
Pacesetter headers/Ypipe (no cats)
Trailblazer convertor
ported tb
on 20inch SS wheels
Tuned by Owen Priest from ARD.. Thanks Owen!!
HOT CAM DYNO SHEET.. SAME DYNO SAME TUNER
Last edited by Lc2SFIv6; 04-01-2009 at 05:33 PM.
03-31-2009, 11:40 PM
#4
Staging Lane
Thread Starter
Join Date: Sep 2006
Location: Houston/Katy
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
04-01-2009, 01:22 AM
#6
Staging Lane
Thread Starter
Join Date: Sep 2006
Location: Houston/Katy
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
04-01-2009, 09:12 AM
#10
11 Second Truck Club
iTrader: (31)
Join Date: Jan 2005
Location: Breaux Bridge, LA
Posts: 5,861
Likes: 0
Received 0 Likes
on
0 Posts
very nice #'s!
looks similar to mine except i put down 340/340 SAE
this just goes to show everyone that it doesn't take a big cam to make good power. the good thing about this is you have excellent torque down low and it can still pull up top too. funny thing is these lobes are well over i'd say at the least 7 years old. i'll also go ahead and say it is probably the best off the shelf cam for the 5.3.
looks similar to mine except i put down 340/340 SAE
this just goes to show everyone that it doesn't take a big cam to make good power. the good thing about this is you have excellent torque down low and it can still pull up top too. funny thing is these lobes are well over i'd say at the least 7 years old. i'll also go ahead and say it is probably the best off the shelf cam for the 5.3.