2003 6.0L stock parts
May 11, 2011 | 08:35 PM
#1
2003 6.0L stock parts
I got a complete pull out 6.0 from a 2003 Silverado and did not need anything but the short block. The parts I don't need are:
1) Oil pan with windige tray and oil pick up tube
2) Alternator / power steering bracket
3) Flexplate
4) 317 heads with valves and springs still installed
5) Lifters / push rods / rockers
6) Exhaust manifolds
7) Valve covers (center bolt)
8) Starter
9) a/c pump with bracket
10) Oil dip stick
11) Wiring harness complete with ECM
12) Truck intake with electronic throttle body, vortec cover, and intake pipe
I have more photos of other parts just let me know what you need. Every must go first reasonable offer takes it
1) Oil pan with windige tray and oil pick up tube
2) Alternator / power steering bracket
3) Flexplate
4) 317 heads with valves and springs still installed
5) Lifters / push rods / rockers
6) Exhaust manifolds
7) Valve covers (center bolt)
8) Starter
9) a/c pump with bracket
10) Oil dip stick
11) Wiring harness complete with ECM
12) Truck intake with electronic throttle body, vortec cover, and intake pipe
I have more photos of other parts just let me know what you need. Every must go first reasonable offer takes it
Thread
Thread Starter
Forum
Replies
Last Post
ARC
GMT 800 & Older GM General Discussion
57
Feb 21, 2022 10:54 AM
oharajo
Tuning, Diagnostics, Electronics, and Wiring
2
Jul 18, 2015 09:24 PM