8.1L Big Power is here!!!!
#1
TECH Enthusiast
Thread Starter
Join Date: Jan 2004
Location: KC MO
Posts: 712
Likes: 0
Received 0 Likes
on
0 Posts
8.1L Big Power is here!!!!
After a week of dealing with 2 trucks with trans problems. I walked into my shop and see two brown boxes setting in the corner. I looked at the top one and see Raylar on it. I instantly ripped the box open and see a aluminum head in it. Pulled it and gave it a good looken over. They very good quality well designed. As soon as I get home I will take some pix and put them up.
#5
TECH Enthusiast
Thread Starter
Join Date: Jan 2004
Location: KC MO
Posts: 712
Likes: 0
Received 0 Likes
on
0 Posts
No it still be a little bit. The machine shop is still working on the block. They where doing the line bore when I stopped by today. That and getting my trans guy to start but when he does lookout. Anyhow here are the pixes.
Trending Topics
#10
TECH Enthusiast
Thread Starter
Join Date: Jan 2004
Location: KC MO
Posts: 712
Likes: 0
Received 0 Likes
on
0 Posts
I wish!!! The machine shop has the block ready to assemble. I going to do some miner bowl blending on the heads and the intake is still on its way. I'm hoping in a month I will have up end running and tuned. Its had to get anything done when you spend most of your time out of town.