Where to get 5" exhaust
#1
TECH Veteran
Thread Starter
iTrader: (1)
Join Date: Apr 2004
Location: Arizona Bay
Posts: 4,038
Likes: 0
Received 0 Likes
on
0 Posts
Where to get 5" exhaust
I'm wondering if there's anywhere I can get mild steel or aluminized steel bends. Maybe even a cheap 5" tailpipe I can modify or something. I don't really want to buy a whole 5" diesel catback either, because they're big $$$ and I don't need that much tubing.
I've looked all over and I've found some 14ga bends but I'd prefer 16ga. I found one place, but they want like $80 per bend for aluminized steel.
Any ideas?
I've looked all over and I've found some 14ga bends but I'd prefer 16ga. I found one place, but they want like $80 per bend for aluminized steel.
Any ideas?
#5
http://www.stylintrucks.com/parts.as.../categoryid/28
It's a five inch Granatelli Exhaust System, they also just have the five inch pipes, aluminized for the whole system, and polished stainless steel for the tips. Hopefully this can be somewhat helpful.
It's a five inch Granatelli Exhaust System, they also just have the five inch pipes, aluminized for the whole system, and polished stainless steel for the tips. Hopefully this can be somewhat helpful.
#7
TECH Veteran
Thread Starter
iTrader: (1)
Join Date: Apr 2004
Location: Arizona Bay
Posts: 4,038
Likes: 0
Received 0 Likes
on
0 Posts
I checked out the link that you sent me and they sell a 5" madrel 90* bend, but it too is $80. It's made by Flowmaster and it's 16ga aluminized. I found some mild steel 5" bends that are 14ga for only $27, but I don't like the fact of the extra weight 14ga carries.
Nobody seems to make just a cheap universal 5" tailpipe kit. I see 4" ones, but not 5". To get a 5" I'd have to buy a whole turbo back setup with a muffler and crap. I might have to just bite the bullet and spend the $80 a bend.
Nobody seems to make just a cheap universal 5" tailpipe kit. I see 4" ones, but not 5". To get a 5" I'd have to buy a whole turbo back setup with a muffler and crap. I might have to just bite the bullet and spend the $80 a bend.
Trending Topics
#8
TECH Junkie
Join Date: Mar 2003
Location: Katy, TX
Posts: 3,271
Likes: 0
Received 0 Likes
on
0 Posts
http://store.airflo.com/exhaust-elbows.html
or
www.warpspeedperformance.com
Both cheap and good quality. I had one of the warpspeed duramax kits and it had enough pipe and bends to build a 4" catback exhaust for my buddies 04' ECSB Silvy and a 4" turboback for my old RCLB Cummins. That kit was only like $325 shipped with a muffler.
or
www.warpspeedperformance.com
Both cheap and good quality. I had one of the warpspeed duramax kits and it had enough pipe and bends to build a 4" catback exhaust for my buddies 04' ECSB Silvy and a 4" turboback for my old RCLB Cummins. That kit was only like $325 shipped with a muffler.