FS: 1997 Camaro SS Convertible Project
#1
FS: 1997 Camaro SS Convertible Project
Guys,
I have a 1997 30th anniversary Camaro SS convertible project car for sale. Its been sitting for 2 years and I still can't find time to finish it... and to top it off im getting married and trying to buy a house. So... it's gotta go. I'll try and get some pics in the next few days...
Here's the specs:
Engine:
355 LT4 w/ATI P1SC (0 miles on it)
- LT4 Heads
- ARP Head Studs
- LT4 Intake
- LT4 Timing set
- Milodon splayed 4 bolt main
- ARP Main Studs
- Forged GM performance Crank
- Eagle Forged ESP Rods
- Wiseco Custom Forged Pistons (8 to 1 Compression Ratio)
- GM Performance 846 cam
- Comp Cams Hi-Tech one-piece Chromemoly Pushrods
- Crane Lifters
- ATI Super Damper
- Canton Oil Pan
- Aeromotive Fuel Pressure Regulator
- MSD Blaster Coil
- ATI Procharger P1SC w/ twin Intercoolers
- Racetronix Fuel pump
- 52lb injectors
- GM Opti
- JET hot Long tube coated headers
- True Duels all the way back out the rear
Drive Line:
- New T56 6 Speed
- Mcleod Twin Disc Clutch
- 4:10 Rear
- Aluminum Drive Shaft
Chassis:
- Corvette C5 Front Brakes
- New wheel bearings
- New front and rear shocks
- H & R Lowering Springs
- BMR Tubular Control Arms
- BMR Panhard Rod Relocation Kit
- BMR Adjustable Panhard Rod
- Spohn Tubular Adjustable Torque Arm
- New Ball Joints
- Energy Suspension Full Suspension Bushing set
Body:
- Wolf 6 point roll bar w/ swing-outs
- SLP SS Hood, Spoiler
- Convertible
- White w/ white Leather
- Hugger Orange SS Stripes
- White 2000 SS wheels
- 52k miles on it
Asking: $9500 / OBO
I know I could part it out for more... But I just don't have the time or place to do it. Someone can finish it and have on Bad @ss car or part it out and make a few bucks...
The car is located in Livonia, MI
If interested Please call me at (248) 494-3305 or email me at jayviphone@yahoo.com
Thanks,
Jay
I have a 1997 30th anniversary Camaro SS convertible project car for sale. Its been sitting for 2 years and I still can't find time to finish it... and to top it off im getting married and trying to buy a house. So... it's gotta go. I'll try and get some pics in the next few days...
Here's the specs:
Engine:
355 LT4 w/ATI P1SC (0 miles on it)
- LT4 Heads
- ARP Head Studs
- LT4 Intake
- LT4 Timing set
- Milodon splayed 4 bolt main
- ARP Main Studs
- Forged GM performance Crank
- Eagle Forged ESP Rods
- Wiseco Custom Forged Pistons (8 to 1 Compression Ratio)
- GM Performance 846 cam
- Comp Cams Hi-Tech one-piece Chromemoly Pushrods
- Crane Lifters
- ATI Super Damper
- Canton Oil Pan
- Aeromotive Fuel Pressure Regulator
- MSD Blaster Coil
- ATI Procharger P1SC w/ twin Intercoolers
- Racetronix Fuel pump
- 52lb injectors
- GM Opti
- JET hot Long tube coated headers
- True Duels all the way back out the rear
Drive Line:
- New T56 6 Speed
- Mcleod Twin Disc Clutch
- 4:10 Rear
- Aluminum Drive Shaft
Chassis:
- Corvette C5 Front Brakes
- New wheel bearings
- New front and rear shocks
- H & R Lowering Springs
- BMR Tubular Control Arms
- BMR Panhard Rod Relocation Kit
- BMR Adjustable Panhard Rod
- Spohn Tubular Adjustable Torque Arm
- New Ball Joints
- Energy Suspension Full Suspension Bushing set
Body:
- Wolf 6 point roll bar w/ swing-outs
- SLP SS Hood, Spoiler
- Convertible
- White w/ white Leather
- Hugger Orange SS Stripes
- White 2000 SS wheels
- 52k miles on it
Asking: $9500 / OBO
I know I could part it out for more... But I just don't have the time or place to do it. Someone can finish it and have on Bad @ss car or part it out and make a few bucks...
The car is located in Livonia, MI
If interested Please call me at (248) 494-3305 or email me at jayviphone@yahoo.com
Thanks,
Jay
Last edited by CamaroSS30th; 07-10-2008 at 08:59 AM.
#5
It has ac... it probably needs to be recharged. The car doesn't run yet... here is what it needs:
- Engine wiring needs to be checked... make sure all grounds are good.
- New spark Plug wires... Needs to be custom length.
- Change and check all fluids.
- Check Vac system
- Check crank case ventilation system
- Custom engine tune (computer tune)
- Exterior TLC (Wash, Wax...)
Thanks,
Jay
- Engine wiring needs to be checked... make sure all grounds are good.
- New spark Plug wires... Needs to be custom length.
- Change and check all fluids.
- Check Vac system
- Check crank case ventilation system
- Custom engine tune (computer tune)
- Exterior TLC (Wash, Wax...)
Thanks,
Jay
Thread
Thread Starter
Forum
Replies
Last Post
hirdlej
Trucks and SUV Classifieds
1
08-10-2015 10:51 PM
SleeperGMC
GM Drivetrain & Suspension
0
07-29-2015 10:22 AM