6.0 LQ4 Into A 86' Suburban *SWAP*
11-16-2010 | 09:04 PM
#1
6.0 LQ4 Into A 86' Suburban *SWAP*
So I just bought a 86' suburban 3/4 ton for 500$ EVERYTHING WORKS 
Its in great shape only 63000 miles. I'm going with the stock th350 trans. I just ordered the dirty dingo swap mounts, I have f-body pacesetter headers and a wiring harness. this will be my build thread and I will post pictures soon. can I get some feed back on what problems the guys that have done this swap have ran into? And can I get some more info on the VSS signal generator thing that gets the PCM out of the idle tables while keeping the stock speedo. Also keeping a/c , I read that someone on here makes a bracket to move the compresser to the top of the motor any info on keeping a/c and cruise control would be great aswell
Its in great shape only 63000 miles. I'm going with the stock th350 trans. I just ordered the dirty dingo swap mounts, I have f-body pacesetter headers and a wiring harness. this will be my build thread and I will post pictures soon. can I get some feed back on what problems the guys that have done this swap have ran into? And can I get some more info on the VSS signal generator thing that gets the PCM out of the idle tables while keeping the stock speedo. Also keeping a/c , I read that someone on here makes a bracket to move the compresser to the top of the motor any info on keeping a/c and cruise control would be great aswell
Last edited by Camaro Chris; 11-16-2010 at 09:10 PM.
Thread
Thread Starter
Forum
Replies
Last Post
GrooveCityZ71
GM Engine & Exhaust Performance
7
08-31-2015 12:05 PM
05GMC4.8
GMT 900 Trucks General Discussion
5
08-07-2015 09:55 PM
