E Fans in a OBS Please Help
#1
On The Tree
Thread Starter
iTrader: (3)
Join Date: May 2009
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
E Fans in a OBS Please Help
I would LOVE to do E-Fans in my 99 OBS!
Black Bear has a harness kit that includes a PIN to add to the PCM to make it run like OEM. Problem is Justin doesn't know where it goes! Haha
or
any other ideas? Hard wiring them to a ON and OFF toggle switch is OUT OF THE QUESTION!
Black Bear has a harness kit that includes a PIN to add to the PCM to make it run like OEM. Problem is Justin doesn't know where it goes! Haha
or
any other ideas? Hard wiring them to a ON and OFF toggle switch is OUT OF THE QUESTION!
#2
On The Tree
iTrader: (2)
Join Date: Jun 2009
Location: Central Mass
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
usually you add a temperature sensor inline with the coolant somewhere that triggers the fans
and if you're crafty you add an override so you can shut off or manually start the fans if you need
and if you're crafty you add an override so you can shut off or manually start the fans if you need
Trending Topics
#9
Truck Sponsor
iTrader: (3)
Join Date: Aug 2005
Location: San Diego, CA
Posts: 473
Likes: 0
Received 0 Likes
on
0 Posts
These harnesses are not marketed for the OBS. Were he to put a harness on a NBS, then yes, 42 and 33 would be the correct PINs.
I do believe this is correct and should have you well on your way.
I do believe this is correct and should have you well on your way.
#10
On The Tree
Thread Starter
iTrader: (3)
Join Date: May 2009
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
THANKS JENNA!
Please have Justin Tune my PCM that I left with him for E-Fans as well as have the EGR tuned out!
I think I'm going catless too since I just scored a set of LT's. Is it possible to tune out the 02's or simutale a signal?
The BB Kit comes with one pin or two?
Please have Justin Tune my PCM that I left with him for E-Fans as well as have the EGR tuned out!
I think I'm going catless too since I just scored a set of LT's. Is it possible to tune out the 02's or simutale a signal?
The BB Kit comes with one pin or two?