Syclone, Operation: "Quick Brick"
#1
TECH Apprentice
Thread Starter
Join Date: Sep 2005
Location: Steel City
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
Syclone, Operation: "Quick Brick"
Taking a slightly modded, "low" mileage Syclone, to the street/race borderline.
Numbers...
Starting:
262 cubic inches
9.4:1 compression ratio
.390 total lift
165 cfm heads
32 lb/hr fuel injectors
15 psi of boost
130 degrees IAT
1.85 secs 60ft
14.0 quarter mile ET
Finishing:
287 cubic inches
8.5:1 compression ratio
.575 total lift
250 cfm heads
65 lb/hr fuel injectors
22 psi of boost
50 degree IAT
72 mm turbocharger
To be determined:
*** horsepower
*** 60ft
*** 1/4 mile ET
Numbers...
Starting:
262 cubic inches
9.4:1 compression ratio
.390 total lift
165 cfm heads
32 lb/hr fuel injectors
15 psi of boost
130 degrees IAT
1.85 secs 60ft
14.0 quarter mile ET
Finishing:
287 cubic inches
8.5:1 compression ratio
.575 total lift
250 cfm heads
65 lb/hr fuel injectors
22 psi of boost
50 degree IAT
72 mm turbocharger
To be determined:
*** horsepower
*** 60ft
*** 1/4 mile ET
Last edited by AeroKing; 04-29-2008 at 04:57 AM.
#4
TECH Apprentice
Thread Starter
Join Date: Sep 2005
Location: Steel City
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
well, the cam was delivered yesterday. after reading the card, and adjusting the lift for my rocker ratio.
looks like it'll be just shy of .600 full lift.
I got all the bottom end parts in from the race shops. I'm gonna start bottom end assembly, next week. (after Daytona weekend).
Still waiting on the heads.
But dont worry, i'll post plenty of pictures cause i'm dong the build myself.
looks like it'll be just shy of .600 full lift.
I got all the bottom end parts in from the race shops. I'm gonna start bottom end assembly, next week. (after Daytona weekend).
Still waiting on the heads.
But dont worry, i'll post plenty of pictures cause i'm dong the build myself.