What do these trucks run stock? It has the 3.90 rear ratio. My buddy just bought one and he wants to try my truck. Gonna do it when we can get a day off together just curious how mine will compare. Never ran mine in 1/4. Mods and 1/8 mile e.t. In sig. Thanks.

 

Might be a close race, a stock R/T might run mid-upper 13's to low 14's.
Being fully stock and a new to him truck I'd think he will run on the slower end of the range. Like anything else it takes practice to get the most out of it

 

i saw a bone stock one run 13.9 at 94 mph
I was pretty impressed it ran that good

 

ya ive seen 13.9 to... that torque converter dont play lol

 

WELL IF ITS A R/T THEY COME WITH 4.10 GEARS AND I HAVE SEEN THEM RUN HIGH 13'S TO LOW 14'S DEPEND ON THE TRACK AND WEATHER. THE 2011 R/T COME WITH 22'S SO IT SHOULD BE LOW 14S- MID 14S WITH HEAVIER WHEELS BONE STOCK

THE 2009-2010 R/T CAME WITH 20'S


HERE IS M3SRT REG CAN NNBS CHEVY WITH 220/220 CAM, FULL BOLTON, TUNE VS A STOCK 09 R/T ON THE 20'S

http://www.youtube.com/user/M3SRT#p/u/51/bIp2AMM5XBg

 

ive seen intake muffler n programer on stock 20s go 13.6-13.5

 

The 22s are actually slightly lighter than the 20s. Depending on the tire profile, overall gearing may or may not be different.

My stock '09 went 13.75 @ 99.8

 

Wow impressive!

 

I'm considering buying one of these, found an '11 w/ 2k miles 29k. Then I think to myself... a stock 09'+ 6L80e GM with a stock 6.2 and the same mods I'd do to both:

Lt's / Catback
Intake
tune

.... which would I rather have then? I understand the R/T is more of a complete package but I spent a day in a denali and couldn't help but think how much fun that would be in a RCSB.

 

or you could say to heck with it and try to scratch up an srt8 jeep GC for that sort of coin
awd and fast from the get go