why not hemi 6.1 swap?
#4
Teching In
Thread Starter
Join Date: Oct 2006
Location: Mississippi
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
i am a tech at dodge i have a 6.1 sitting in the crate by my stall it came in on a recall under manufacture error. during assembally one of the wrist pins was incorrectly installed. it came out of a 300c. if chrysler doesn't call for it i plan on requesting it for myself. seem to be a cheaper alturnative to buying a crank rods pistons cam and all that good stuff. i knew that a few of you guys did the crank swaps but didn't know if you have gotten hold of a complete 6.1.
#7
SemiHemi, I see that you have one of the 6.1 wrist pin failures. I have a brand new set of 6.1 pistons, rings and rods that I can sell you, if your interested. Rumor has it that HP tuners are close to releasing it.
Trending Topics
#9
TECH Resident
Join Date: Apr 2004
Location: Halifax County, NC
Posts: 755
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by nonnieselman
Wonder what your dad would say when you start tearing the motor out???
Don't be messing with the adults when they are discussing grown up matters........KID!