13.9s w/ bolt ons, tuning & tire
#1
TECH Veteran
Thread Starter
iTrader: (6)
Join Date: Nov 2003
Location: Tallahassee, FL
Posts: 4,397
Likes: 0
Received 0 Likes
on
0 Posts
13.9s w/ bolt ons, tuning & tire
Has anyone made a 13.9 second pass or better with the stock stall converter, no internal mods and/or supercharger, turbo, N2O, with a 5.3L?
I'm talking... bolt ons, tuning, and some sort of tire.
I'm going to take it to the track one last time and see if I can achieve it before I get the stall converter in... I'm at 14.2 @ 97 on a 2.1 60' right now and I just put on a set of Mickey 255/50s and they are dead hooking on the street.
Who has done this? I'd like to know if it is even possible.
I'm talking... bolt ons, tuning, and some sort of tire.
I'm going to take it to the track one last time and see if I can achieve it before I get the stall converter in... I'm at 14.2 @ 97 on a 2.1 60' right now and I just put on a set of Mickey 255/50s and they are dead hooking on the street.
Who has done this? I'd like to know if it is even possible.
#2
11 Second Truck Club
iTrader: (31)
Join Date: Jan 2005
Location: Breaux Bridge, LA
Posts: 5,861
Likes: 0
Received 0 Likes
on
0 Posts
i think you got it. you'll probably see some 2.0 60' maybe some high 1.9's. speed will probably be the same, but you'll have more gearing out the hole to make up for that to get a better ET.
#5
TECH Veteran
Thread Starter
iTrader: (6)
Join Date: Nov 2003
Location: Tallahassee, FL
Posts: 4,397
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, I'll give it a shot...
I think it would be a piece of cake if I added an ASP pulley, 3'' ORY, and weight reduction but, a 14.0 or better would be cool with the current setup.
The 4 link suspension has been useless thus far... Maybe the new tires will let me play around with the settings a bit.
I think it would be a piece of cake if I added an ASP pulley, 3'' ORY, and weight reduction but, a 14.0 or better would be cool with the current setup.
The 4 link suspension has been useless thus far... Maybe the new tires will let me play around with the settings a bit.
Trending Topics
#8
TECH Veteran
Thread Starter
iTrader: (6)
Join Date: Nov 2003
Location: Tallahassee, FL
Posts: 4,397
Likes: 0
Received 0 Likes
on
0 Posts
Eww, I'd say weather conditions were a bit different from last time. I lost 2-mph and my ET remained the same. Definetly needs more RPM, or power at a quicker rate (stall converter). It just wont get off the line quick enough.
I tried playing around with launch techniques. Bumped the shocks up to 7 clicks... Came out of the hole the same. The last pass I stalled it to 1500-RPM and slammed the gas... Same 2.1 60'.
Did cut some good lights. A .1 light was my worst. The other two were a .076 and a .009.
I tried playing around with launch techniques. Bumped the shocks up to 7 clicks... Came out of the hole the same. The last pass I stalled it to 1500-RPM and slammed the gas... Same 2.1 60'.
Did cut some good lights. A .1 light was my worst. The other two were a .076 and a .009.
#10
11 Second Truck Club
Join Date: Jun 2002
Location: Alvin, TX
Posts: 536
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by bluecajun5.3
kyle, i think if we could have lost the gate, spare, and put the short belt on your truck you could have hit it. don't give up man. i have faith in that truck...
I do agree though, you have more "little things" to do that can add up.