13's
#1
TECH Resident
Thread Starter
iTrader: (1)
Join Date: Aug 2004
Location: Oklahoma
Posts: 871
Likes: 0
Received 0 Likes
on
0 Posts
13's
Went out to the midnite drags at TRP last night to try out the new stall and banged out a 13.54 on the 2nd run. Didn't get the MPH as TRP doesn't give timeslips for the midnights. Had a buddy there to film the action, well let's just say he needs a remedial vid camera class. The crack head didn't hit the record button so no video, and he didn't catch the MPH.
I likes the new stall. It really improved the shift extension giving me only a 1600 rpm drop where the TB was 2K. The run was made through mufflers and ET Streets with the only weight reduction being the spare and tailgate.
Attempted a run with the cutout open but the track just wouldn't have it. It must of cooled down too much and condensation formed, or they didn't mop it up good enough because the ET Streets broke loose right out of the gate and wound up with a 14.49. I'm sure it was really all that power from just the cutout and had it hooked I KNOW it would have went 12.50...
I likes the new stall. It really improved the shift extension giving me only a 1600 rpm drop where the TB was 2K. The run was made through mufflers and ET Streets with the only weight reduction being the spare and tailgate.
Attempted a run with the cutout open but the track just wouldn't have it. It must of cooled down too much and condensation formed, or they didn't mop it up good enough because the ET Streets broke loose right out of the gate and wound up with a 14.49. I'm sure it was really all that power from just the cutout and had it hooked I KNOW it would have went 12.50...
#4
TECH Resident
Thread Starter
iTrader: (1)
Join Date: Aug 2004
Location: Oklahoma
Posts: 871
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by bluecajun5.3
that's great!
i'm glad your making some sucessful progress on your truck.
are you running the tci 3k converter?
i'm glad your making some sucessful progress on your truck.
are you running the tci 3k converter?
Last edited by Okie5.3; 09-24-2006 at 08:09 AM.
Trending Topics
#10
TECH Resident
Thread Starter
iTrader: (1)
Join Date: Aug 2004
Location: Oklahoma
Posts: 871
Likes: 0
Received 0 Likes
on
0 Posts
thx guys.
hey tom its getting closer. i'm planning on dropping the heads off this week, along with picking up an F/Y-Bod water pump, accessory bracket, gasket kit, etc... i'm going to go with the TSP 220 .581 112 and maybe a shot of giggle juice on top of that.
hey tom its getting closer. i'm planning on dropping the heads off this week, along with picking up an F/Y-Bod water pump, accessory bracket, gasket kit, etc... i'm going to go with the TSP 220 .581 112 and maybe a shot of giggle juice on top of that.