6-19-09 FireBird Raceway
#1
TECH Fanatic
Thread Starter
iTrader: (9)
Join Date: May 2007
Location: AJ, AZ
Posts: 1,070
Likes: 0
Received 0 Likes
on
0 Posts
6-19-09 FireBird Raceway
I went track last night And had good runs. The nice part the rain scared all the people away. It was nice let the truck sit for 15min. to cool of and than pull right up to the line and run again.
Here is my best time and for some reason my stupid *** took my foot of the throttle and then got right back into it. I was kicking my self the hole time.
60'- 2.242
1/8- 8.877
mph- 84.11
1000- 11.421
1/4- 13.660
mph- 100.75
60- 2.267
1/8- 9.010
mph- 84.34
1000- 11.552
1/4- 13.728
mph- 104.07
da when we started racing 6:51pm
Track Elevation: 1082 feet above sea level
Air Temperature:88 degrees F
Barometric Pressure: 29.65 inches Hg
Relative Humidty:24 %
Density Altitude: 3614 feet
Relative Density: 89.85 %
Here is my best time and for some reason my stupid *** took my foot of the throttle and then got right back into it. I was kicking my self the hole time.
60'- 2.242
1/8- 8.877
mph- 84.11
1000- 11.421
1/4- 13.660
mph- 100.75
60- 2.267
1/8- 9.010
mph- 84.34
1000- 11.552
1/4- 13.728
mph- 104.07
da when we started racing 6:51pm
Track Elevation: 1082 feet above sea level
Air Temperature:88 degrees F
Barometric Pressure: 29.65 inches Hg
Relative Humidty:24 %
Density Altitude: 3614 feet
Relative Density: 89.85 %
Last edited by 53RUSSELL; 06-25-2009 at 11:21 PM.
#2
TECH Fanatic
Thread Starter
iTrader: (9)
Join Date: May 2007
Location: AJ, AZ
Posts: 1,070
Likes: 0
Received 0 Likes
on
0 Posts
Here is another cool web site to look up your DA. Thanks Jeff for the link.
http://www.dragtimes.com/da-density-...ect+ET+and+MPH
http://www.dragtimes.com/da-density-...ect+ET+and+MPH
#3
TECH Addict
Join Date: Dec 2007
Location: Mesa, AZ
Posts: 2,862
Likes: 0
Received 0 Likes
on
0 Posts
It was fun last night, dont forget on one of your runs you trapped 106mph.
You need to borrow some slicks and go out on a cool night, i bet you could get some low 13's with a better 60ft
You need to borrow some slicks and go out on a cool night, i bet you could get some low 13's with a better 60ft
#7
TECH Fanatic
Thread Starter
iTrader: (9)
Join Date: May 2007
Location: AJ, AZ
Posts: 1,070
Likes: 0
Received 0 Likes
on
0 Posts
Well the 60 bit the dust last night. Has no third. I took the tranny builder for a ride on Monday and it was shifty great no sign of slippage. So we took the valve body apart and didn't find no metal a little bit of clutch but he said that was normal. So we are off to build 80 for it replacement.