About what should my truck run in the 1/8th?
#2
On The Tree
Thread Starter
iTrader: (1)
Join Date: Dec 2008
Location: Jackson, TN
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
I'm going this friday.. Just trying to see about what i'm looking forward to! My buddies RCSB tundra runs 8.9s and its completly stock with a flowmaster.. I never raced him but I think I should be able to get him with all the mods I have done..
#5
Wearin' da big hat
iTrader: (10)
That stall is going to help out your 60ft alot, but I think since you have 4.11s and a stock cam, your top end is going to suffer and will keep you out of the 8s.
Fastrt has a 5.3 RCSB with a cam, full bolt ons, 27" slicks, and a stall and is running 8.4s, so depending on how good you hook and if your truck has any top end you might be able to dip into the 8s.
Fastrt has a 5.3 RCSB with a cam, full bolt ons, 27" slicks, and a stall and is running 8.4s, so depending on how good you hook and if your truck has any top end you might be able to dip into the 8s.
#7
Launching!
Join Date: Oct 2008
Location: Abbeville, LA
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
If your 1-2 shift point is at 6000rpm, that puts you at about 72 mph at the shift point, that might be the biggest thing holding you back with the stock cam. You'll most likely be shifting into third right before the 1/8th. My guess is 8.85...