Back to the 1/4 mile
#1
TECH Senior Member
Thread Starter
iTrader: (10)
Join Date: Oct 2004
Location: Crystal Springs, MS
Posts: 14,068
Likes: 0
Received 2 Likes
on
2 Posts
Back to the 1/4 mile
Finally went to the 1/4 for the first time in a few years.*
Just wanted to see what it would do before the turbo goodness starts happening.
First pass was a wicked 15.2@94 2.3 60'!!
Haha. Lil slower than i was expecting but oh well.*
2nd pass was on a 75 shot.*
The kit come on just a lil before i was ready so there was quite a bunch of tire spinage. 14.6@101 *2.6 60'
Decided to try spraying it bout at the 60'.*
13.8@103 2.28 60'
Remembered that i had pulled a trailer last week and let my tire pressure down from 45 to 28
Turned the ranchos down to 0 and put 20# air in the helper bags.*
Scan looked good so i pulled 2* timing out and went to a 125 shot.*
13.5@103 2.1 60'
Hot lap it and ran a 13.3@104 2.06 60'
Swapped the nitrous jet out from a .057 to a .062 since it was rich. So now on the 150 shot it did a 13.2@105 2.05*
I sprayed at 5mph and it hooked, so had to try it again.*
13.1@106 2.05
Not to shabby considering i was on 30.5" hankook all terrains.*
It sounded good too, i did a 4" intake and put the filter down below where the stock air box was. Then welded in the magnaflow i was runnin with the old turbo setup.*
Now its turbo time!
Just wanted to see what it would do before the turbo goodness starts happening.
First pass was a wicked 15.2@94 2.3 60'!!
Haha. Lil slower than i was expecting but oh well.*
2nd pass was on a 75 shot.*
The kit come on just a lil before i was ready so there was quite a bunch of tire spinage. 14.6@101 *2.6 60'
Decided to try spraying it bout at the 60'.*
13.8@103 2.28 60'
Remembered that i had pulled a trailer last week and let my tire pressure down from 45 to 28
Turned the ranchos down to 0 and put 20# air in the helper bags.*
Scan looked good so i pulled 2* timing out and went to a 125 shot.*
13.5@103 2.1 60'
Hot lap it and ran a 13.3@104 2.06 60'
Swapped the nitrous jet out from a .057 to a .062 since it was rich. So now on the 150 shot it did a 13.2@105 2.05*
I sprayed at 5mph and it hooked, so had to try it again.*
13.1@106 2.05
Not to shabby considering i was on 30.5" hankook all terrains.*
It sounded good too, i did a 4" intake and put the filter down below where the stock air box was. Then welded in the magnaflow i was runnin with the old turbo setup.*
Now its turbo time!
#5
9 Second Truck Club
iTrader: (16)
Finally went to the 1/4 for the first time in a few years.*
Just wanted to see what it would do before the turbo goodness starts happening.
First pass was a wicked 15.2@94 2.3 60'!!
Haha. Lil slower than i was expecting but oh well.*
2nd pass was on a 75 shot.*
The kit come on just a lil before i was ready so there was quite a bunch of tire spinage. 14.6@101 *2.6 60'
Decided to try spraying it bout at the 60'.*
13.8@103 2.28 60'
Remembered that i had pulled a trailer last week and let my tire pressure down from 45 to 28
Turned the ranchos down to 0 and put 20# air in the helper bags.*
Scan looked good so i pulled 2* timing out and went to a 125 shot.*
13.5@103 2.1 60'
Hot lap it and ran a 13.3@104 2.06 60'
Swapped the nitrous jet out from a .057 to a .062 since it was rich. So now on the 150 shot it did a 13.2@105 2.05*
I sprayed at 5mph and it hooked, so had to try it again.*
13.1@106 2.05
Not to shabby considering i was on 30.5" hankook all terrains.*
It sounded good too, i did a 4" intake and put the filter down below where the stock air box was. Then welded in the magnaflow i was runnin with the old turbo setup.*
Now its turbo time!
Just wanted to see what it would do before the turbo goodness starts happening.
First pass was a wicked 15.2@94 2.3 60'!!
Haha. Lil slower than i was expecting but oh well.*
2nd pass was on a 75 shot.*
The kit come on just a lil before i was ready so there was quite a bunch of tire spinage. 14.6@101 *2.6 60'
Decided to try spraying it bout at the 60'.*
13.8@103 2.28 60'
Remembered that i had pulled a trailer last week and let my tire pressure down from 45 to 28
Turned the ranchos down to 0 and put 20# air in the helper bags.*
Scan looked good so i pulled 2* timing out and went to a 125 shot.*
13.5@103 2.1 60'
Hot lap it and ran a 13.3@104 2.06 60'
Swapped the nitrous jet out from a .057 to a .062 since it was rich. So now on the 150 shot it did a 13.2@105 2.05*
I sprayed at 5mph and it hooked, so had to try it again.*
13.1@106 2.05
Not to shabby considering i was on 30.5" hankook all terrains.*
It sounded good too, i did a 4" intake and put the filter down below where the stock air box was. Then welded in the magnaflow i was runnin with the old turbo setup.*
Now its turbo time!
#7
TECH Senior Member
Thread Starter
iTrader: (10)
Join Date: Oct 2004
Location: Crystal Springs, MS
Posts: 14,068
Likes: 0
Received 2 Likes
on
2 Posts
Was shifting it at 6200 on motor and 6000 on the 75 shot, and 5600 on the 125 and 150.
I was runnin my 87 oct tune, with 93 oct and pulled 2* out for the 150 shot.
The -6 feed line didnt help matters either with no purge so i had to do a mini burnout to clear the line. It could have gone 12s on the right jet mix, and a consistent bottle pressure. But oh well it was fun.
I cant help it
I still had my rifle under the back seat so i guess i cant hide it.
Oh i think i forgot to mention the 50# bottle i got for $50. I wouldnt have put the kit on ifi didnt get that.
Total 3 bottles empty and 160 miles round trip, 15 mpg
Trending Topics
#9
TECH Senior Member
Thread Starter
iTrader: (10)
Join Date: Oct 2004
Location: Crystal Springs, MS
Posts: 14,068
Likes: 0
Received 2 Likes
on
2 Posts
i found some 200 hp jets
Hooking up the bottle heater to keep the pressure consistant and then see what she will do.
anybody know where to find a assortment pack of jets?
Hooking up the bottle heater to keep the pressure consistant and then see what she will do.
anybody know where to find a assortment pack of jets?
#10
TECH Senior Member
Thread Starter
iTrader: (10)
Join Date: Oct 2004
Location: Crystal Springs, MS
Posts: 14,068
Likes: 0
Received 2 Likes
on
2 Posts
I looked at my logs and it shows i got on the kit at 10-12mph,, so if i could have hit it off idle and hooked with the right AFR, i bet it would have gone 12.8s.