Before -After cam then headers
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: Feb 2007
Location: Pace, FL
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
help: Before -After cam then headers
I got the LT headers with xpipe installed. The cam is a 220 224 112+4 .570"
1/8 mile track:
Converter and tune all stock exhaust: 9.71@70 with a 2.20 60'
after cam, U drive pulley, dual exhaust: 9.30@75 with a 2.07 60'
Then finally did pacesetter headers and an x-pipe: 9.34@74 with a 2.06 60'
This is a fully loaded and heavy truck (AWD and quad steer). Other mods listed in signature.
I thought headers would do something... My goal was to be at least equal to my wife's stock TBSS. It ran 9.19@78.8 with a 2.19 60'.
1/8 mile track:
Converter and tune all stock exhaust: 9.71@70 with a 2.20 60'
after cam, U drive pulley, dual exhaust: 9.30@75 with a 2.07 60'
Then finally did pacesetter headers and an x-pipe: 9.34@74 with a 2.06 60'
This is a fully loaded and heavy truck (AWD and quad steer). Other mods listed in signature.
I thought headers would do something... My goal was to be at least equal to my wife's stock TBSS. It ran 9.19@78.8 with a 2.19 60'.
Last edited by 02Denali6L; 05-31-2008 at 02:49 PM.
Trending Topics
#9
TECH Addict
Join Date: Dec 2007
Location: Mesa, AZ
Posts: 2,862
Likes: 0
Received 0 Likes
on
0 Posts
your 60' is better i think its just having troubles moving all that weight. i dont know how much those weigh but if memory serves me right 6000-7000lbs compared to the TBSS 5000lbs, i think if you ditch some weight you would be were you want to be.
also what rims are you on with what size tire?
also what rims are you on with what size tire?