Broke the all time Hemi truck record today
10-26-2008, 05:33 AM
#11
TECH Enthusiast
Thread Starter
Join Date: Feb 2006
Posts: 510
Likes: 0
Received 0 Likes
on
0 Posts
10-26-2008, 05:47 AM
#12
TECH Enthusiast
Thread Starter
Join Date: Feb 2006
Posts: 510
Likes: 0
Received 0 Likes
on
0 Posts
10-26-2008, 12:55 PM
#16
TECH Enthusiast
Thread Starter
Join Date: Feb 2006
Posts: 510
Likes: 0
Received 0 Likes
on
0 Posts
The truck is an 05 Dodge Ram 4x4. Race weight is 5130. The engine is stroked from 6.1 to 6.4 (392) and fully forged with 8.6:1 comp. Custom heads, custom 216/220 114 lsa cam, Mopar Perf intake manifold, custom built trans and valve body with an Edge 3700 stall converter, SMT6 piggyback and Superchips for tuning, 66 lb injectors with adj fuel pressure reg, 3.92 gears, 4, M&H dr's at 26.5 psi, Caltrac's, 15 psi from a Paxton NOVI 1500, Snow Perf w/m, no intercooler, 2 stage N2O (50/30 shot cause trever1t made me do it lol).
10-26-2008, 01:52 PM
#19
TECH Enthusiast
Thread Starter
Join Date: Feb 2006
Posts: 510
Likes: 0
Received 0 Likes
on
0 Posts
Since the 11.8 run, I pullied down from a 3.25" to a 3.0". I can now peg the boost gauge to 15psi. I also pulled the spring clamps off and added a set of Caltrac's. For tuning, I pulled the Superchips performance tune out, which I pull 8* of timing with the SMT6 and set it to the 87 tune and pull 2* of timing with the SMT6. I also switched out my plugs from TR5's to TR6's. I also had some good air yesterday. 1200' from 1600' from the 11.8 pass.
Last edited by hemidup; 10-26-2008 at 01:52 PM. Reason: sp
10-26-2008, 02:07 PM
#20
TECH Enthusiast
Thread Starter
Join Date: Feb 2006
Posts: 510
Likes: 0
Received 0 Likes
on
0 Posts
Too bad my kids are all grown up and moved out cause they could teach their old man some new tricks about computers. I might be able to email them to you and thats just a maybe...