Converter to tight?
#1
TECH Enthusiast
Thread Starter
Join Date: Aug 2008
Location: Dallas
Posts: 637
Likes: 0
Received 0 Likes
on
0 Posts
Converter to tight?
I have a Yank Pro 3200 stall in my truck w/ 3.73's. The truck traps 90 mph in the 1/8 with only a 1.89 60ft. The cam is a comp cam 224/230, .585.590 lift on a 114 ls. 6.0 is all stock except for the cam and pushrods. I run a 29.5 slick. The truck just feels lazy till 4500 or so, its a small cam and the power should come in well before that. On the scanner it shows it stalls 3200 on the dot before you see the mph pick up.
#6
TECH Enthusiast
Thread Starter
Join Date: Aug 2008
Location: Dallas
Posts: 637
Likes: 0
Received 0 Likes
on
0 Posts
Another question I have is how much power have you made and NOT broke the stock axles? I broke the stock(g80) limmited slip the first pass I made on spray hitting it out of the hole. It had 162,000 miles on it so I was not in shock. I put some "Superrior Gears and Detroit Tru Trac" in it but now I'm scared of the stock axles breaking. Gun Shy is the proper words I guess...lol