FIRST 1/4 run tomorrow, any predictions??
05-02-2009, 07:19 PM
#61
13 Second Truck Club
iTrader: (13)
Join Date: Mar 2008
Location: Arlington (DFW), Texas
Posts: 2,663
Likes: 0
Received 0 Likes
on
0 Posts
I found what the problem was this entire time, it was the nitrous solenoid working sometimes, then would stop, then begin working again. So faulty nitrous solenoid has plagued me since my very first day at the track with nitrous.
05-02-2009, 10:26 PM
#62
TECH Fanatic
iTrader: (15)
Join Date: Oct 2006
Location: Texas
Posts: 1,601
Likes: 0
Received 0 Likes
on
0 Posts
I ended up running:
1.889 60ft 13.422@99.28
Weather was horrible, 85-90% humidity, DA in the 2000-2300...
OH and the best part....
Since it was my first time on a 1/4 track, i had no clue where the beams were, so my first 5 runs i let out early... All my other runs were at 94mph. One time i ran a 13.6 @ 87mph... Yes i know i am moron...
1.889 60ft 13.422@99.28
Weather was horrible, 85-90% humidity, DA in the 2000-2300...
OH and the best part....
Since it was my first time on a 1/4 track, i had no clue where the beams were, so my first 5 runs i let out early... All my other runs were at 94mph. One time i ran a 13.6 @ 87mph... Yes i know i am moron...
05-03-2009, 12:28 AM
#63
Launching!
Join Date: Oct 2008
Location: Abbeville, LA
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
Very nice times, especially considering the temp and your setup. What I like about the track I usually run at, I can see my time just before I cross the timing tower. It's usually just a big disappointment though haha!
05-03-2009, 08:36 AM
#66
I found a video of you running 13.6 on ls1 trucks dot com
http://www.allensrodeophotos.com/Ste...9/DSC_0127.m4v
just thought that I would post it for you.
http://www.allensrodeophotos.com/Ste...9/DSC_0127.m4v
just thought that I would post it for you.
05-03-2009, 09:41 AM
#67
I found a video of you running 13.6 on ls1 trucks dot com
http://www.allensrodeophotos.com/Ste...9/DSC_0127.m4v
just thought that I would post it for you.
http://www.allensrodeophotos.com/Ste...9/DSC_0127.m4v
just thought that I would post it for you.
05-03-2009, 11:38 AM
#68
TECH Enthusiast
iTrader: (3)
Join Date: Dec 2006
Location: Wichita Falls, Texas
Posts: 509
Likes: 0
Received 0 Likes
on
0 Posts
I ended up running:
1.889 60ft 13.422@99.28
Weather was horrible, 85-90% humidity, DA in the 2000-2300...
OH and the best part....
Since it was my first time on a 1/4 track, i had no clue where the beams were, so my first 5 runs i let out early... All my other runs were at 94mph. One time i ran a 13.6 @ 87mph... Yes i know i am moron...
1.889 60ft 13.422@99.28
Weather was horrible, 85-90% humidity, DA in the 2000-2300...
OH and the best part....
Since it was my first time on a 1/4 track, i had no clue where the beams were, so my first 5 runs i let out early... All my other runs were at 94mph. One time i ran a 13.6 @ 87mph... Yes i know i am moron...
Here is the run..i believe this is you...need quick time to watch
http://www.allensrodeophotos.com/Ste...9/DSC_0131.m4v
05-03-2009, 12:44 PM
#69
I believe you ran me on that run...your truck runs strong...humidity was over 90% so the air was too thick for any record best..the L were saying they are normally a .5 second faster consistently than they were running friday night...if that the case your 13.34 could be a 12.9 on perfect conditions and my 12.6 could be a 12.1
Here is the run..i believe this is you...need quick time to watch
http://www.allensrodeophotos.com/Ste...9/DSC_0131.m4v
Here is the run..i believe this is you...need quick time to watch
http://www.allensrodeophotos.com/Ste...9/DSC_0131.m4v
