joshua022

iTrader: (12)

I ran a 14.7 1/4 at 93mph in a 2003 silverado 1550 ecsb with:

thunder racing cam .224 duration intk/exhst and .561 lift intk/exhaust
2400 b&M stall
edelbrock shorties
dynomax exhaust
vararam intake
hptuners dyno tune

I know I need slicks so I can launch a little better. But what else do I need??

slownlow4.8

iTrader: (5)

i'd said a bigger stall and get some long tube headers

rivierakid55

iTrader: (1)

yep bigger stall and slicks. some lt's would be nice too.

joshua022

iTrader: (12)

how much bigger of a stall?

always2slow04

I have almost the same cam and I'm either going to run a 3200 or a 3400 converter. The one you have right now is tiny.

beastmode

iTrader: (52)

im runnin a TR224 wit a TT3000 stall

99Silverado5.3

iTrader: (7)

For a better 1/4 time either add hp or get out of the hole quicker..
...or you can drive it off a cliff that's at least a 1/4 mile high..

joshua022

iTrader: (12)

What kind of times are you running??

beastmode

iTrader: (52)

my best was a 14.22@96

i have timing issues and it was my first time drag racing... plus i have NOTHING done to the trans other than the stall so my shifts are really dragged out so my trans lasts... with a tranny build and the timing fixed id say the trucks good for like 13.5 atleast

blkssncpt

iTrader: (2)

LT's, bigger stall, shift kit, work on the tranny...