Casey2323

iTrader: (14)

I am hit and miss on the caltrax setup since i have changed turbos,converters and rear gears every time i go to the track.... I have not seen many trucks make this much tire noise ever...... it lasted more then 800 foot.... http://s171.photobucket.com/albums/u...t=VID00003.flv

Wilde Racing

iTrader: (26)

what is the mph?

Parke10

iTrader: (5)

what was the sparks by the right rear right at launch

Casey2323

iTrader: (14)

I would say thats even more strange... I have been 6.8X @ 108.7 already ON this pass my .60 foot was 2.02 went 7.07 @ 99 and 11.08 @ 121 Truck went dead strait but it never really pulled at all..... just flat and felt like it drove threw the converter the whole time.... I run MT Drag Radials... Chassis was WAYYYY off.... This was my last pass of the night and gave me the most data.....I am still on low boost but it was pretty humid and have to get my IAT under control.... it would not pull clean more then 500 foot ....... IDK if all the excessive heat was because of the wheel spin but I have been IAT 110 @ 138mph on 14.5psi @ 6000rpms.... that was when it was 91 outside.....

getonit

iTrader: (3)

Man you have beast!!!!! That looks like a badass setup. When you get that thing dialed in it is going to be nasty.

viper9403

iTrader: (14)

Prob. a rock....

The truck has way more in it. Black tracked all night....Once Casey gets the suspension straight he might even turn it up!

litreddevil

iTrader: (4)

could you be spinging both the tire and the tire in the rim just a thought i have seen it on high tq set ups

chevrolet all the way

iTrader: (24)

holy tiny track! and did you run with your window down?

that truck is pretty sick though!

Casey2323

iTrader: (14)

I did hope u would chime in and tell me WTF i am doing so wrong..... I have been over everything front to back from shocks to springs going over ride height and pinion angle... possibly made more adjustments then i should have but...... hope all will pay off soon !!... I would like to see my truck in the mid or low 1.50s... anything any better would be a huge plus... but for now i would be happy making back to 1.6X ... And yes.. I have 5 screws on the inside and outside of bolth wheels... Truck was setup WAY to ridgid... I didnt know that was possible.. but i think i can ease up with the chassis when i smack the power off the trans brake

Tootall

iTrader: (79)

any side shots to see your weight transfer? Can you lower the rear any more?