New Best for The SS
#1
TECH Addict
Thread Starter
iTrader: (25)
Join Date: Dec 2004
Location: southern california
Posts: 2,913
Likes: 0
Received 0 Likes
on
0 Posts
New Best for The SS
A few of us( Adam, Reynaldo and I) went to the Perris 1/8th mile drags tonight, i went just to see how i would do with 18's and smaller tires but with a stock motor and the sq trim blower. the new wheels did lose about 22 lbs each over the 22's .I also did not have a cam this time all stock motor except the blower. I am using the 3.1 puley making around 10-11 psi. The truck did look a bit goofy but it was all for performance, and to my surprise it hooked pretty goood.Here are the vids'
First one is my best 1/8th time ever and the new fastest 60 ft time for a SSS. And i gotta little AWD burnout in the water box)
HELL YEAH VIDEO
times were
1/8th 7.752
speed 93.32
R/T 1.005
and the good part
60 ft 1.633
Here is the last run i did it wasnt as good plus they missed the burnout
2nd Run
1/8th 7.866
speed 93.80
r/t .528
60 ft 1.733
so it was a very surprising night for me. I didnt expect to run these times at all , but the new wheels helped alot, but they also set of alot of codes because of the size and the speed sensors, but they were all gone as soon as the 22's wen tback on.
My buddy just rebuilt his 350 in his 67 camaro and i told him he wasnt doing a big enough burnout the first run so he did this, he still couldnt get any traction and he was launching in 2nd gear. i think he will do much better once he gets some slicks.
Nice Camaro Burnout
We also met another member we have talked to before SS dan i think his name was. he had a clean blass SS with black 20's. ALl in all it was a good night. i wish we could have seen reynaldos STS SS run but next time , thanks again reynaldo for filming!!
First one is my best 1/8th time ever and the new fastest 60 ft time for a SSS. And i gotta little AWD burnout in the water box)
HELL YEAH VIDEO
times were
1/8th 7.752
speed 93.32
R/T 1.005
and the good part
60 ft 1.633
Here is the last run i did it wasnt as good plus they missed the burnout
2nd Run
1/8th 7.866
speed 93.80
r/t .528
60 ft 1.733
so it was a very surprising night for me. I didnt expect to run these times at all , but the new wheels helped alot, but they also set of alot of codes because of the size and the speed sensors, but they were all gone as soon as the 22's wen tback on.
My buddy just rebuilt his 350 in his 67 camaro and i told him he wasnt doing a big enough burnout the first run so he did this, he still couldnt get any traction and he was launching in 2nd gear. i think he will do much better once he gets some slicks.
Nice Camaro Burnout
We also met another member we have talked to before SS dan i think his name was. he had a clean blass SS with black 20's. ALl in all it was a good night. i wish we could have seen reynaldos STS SS run but next time , thanks again reynaldo for filming!!
#6
formerly silverbrick (changed 02/17/2013)
iTrader: (5)
Join Date: Mar 2006
Location: Pasadena, Tx
Posts: 4,525
Likes: 0
Received 0 Likes
on
0 Posts
ok so how do i get rid of this advertisement....its been going on for 40 seconds before the video
edit: never mind i just refreshed it...sweet vid, dang that things fast. what are the mods on it
edit: never mind i just refreshed it...sweet vid, dang that things fast. what are the mods on it
#7
TECH Addict
Thread Starter
iTrader: (25)
Join Date: Dec 2004
Location: southern california
Posts: 2,913
Likes: 0
Received 0 Likes
on
0 Posts
Vortech supercharger 3.1 pulley ,ford svo 50lb green injectors, Fluiddyne heat exchanger w/e-fans,Toy Shop Built 4l65e vette servos with TCS 2800 stall,tru-cool 47391,MSD plug wires ,ngk tr6(.035),Zippy tuned pcm,Outlaw CAI,Magnaflow dual in/out,05 e-fans,160 T-stat,Alumasport Baer brakes w/ stainless lines,******* speedsturr bed cover,BSER roll pan w/hitch,McGaughy 2-3 deluxe kit w/beltech bumpstops/6*shims/ nitro active shocks(front/rear) ,precison billet grill,Goodmark cowl hood,Shopman1 bowtie,Chrome SS Emblems.Shaved tailgate ,Motoforge 22's(22x10) powdercoated black,Toyo proxes 305/40/22,tog headers,5000K philips h.i.d. kit, hotchkis anti-sway bars ,aeroforce interceptor gauge,Valentine1,optima yellow,200 amp alt,smoked tails w/led third.autometer phantom2 boost and fuel press gauges.hp tuners, lm1 wideband
Trending Topics
#9
TECH Addict
Thread Starter
iTrader: (25)
Join Date: Dec 2004
Location: southern california
Posts: 2,913
Likes: 0
Received 0 Likes
on
0 Posts
lol i do , i just copied and pasted, about half of that list is appearance mods anyway, i do also have a futral cam,compe sprigs/retainers and rods, lpe oil pump,pacesetter long tubes,magnaflow high flow cats, magnaflow muffler dual 3 in/out, and custom built ics box for future mods that i am yet to install just have not around to it.