New PB 10.90@126
#1
11 Second Truck Club
Thread Starter
iTrader: (7)
Join Date: Nov 2007
Location: Cedar, MN
Posts: 800
Likes: 0
Received 0 Likes
on
0 Posts
New PB 10.90@126
Got to the track today for the last race of the season. Temps were a chilly 24 degrees, traction was not very good due to the cold weather. Last time out I ran a 11.53@121 launching from a dead idle, and an 11.25@120 leaving at 0-1psi and spinning. I had my Circle-D 2b 258mm multi disc changed to a 1a, which tightened it up from around 4400 to about 34-3500. This time out I ran an 11.26@125 with a 2.23 60' from a dead idle which is .26 second better from the converter change itself. Second run was a 10.90@126.9 with a 1.84 60' leaving from the same 0-1psi. I would LOVE to be able to launch this thing at 10psi in 4x4 and hook...
This is still with bone stock 317 heads and my little tc76 at 14 psi. I plan to get either some ported 317's or maybe some trick flow heads, and waiting for kyle to hook me up with the new 76/76 turbonetics turbo over the winter, along with a set of 4 drag radials.
This is still with bone stock 317 heads and my little tc76 at 14 psi. I plan to get either some ported 317's or maybe some trick flow heads, and waiting for kyle to hook me up with the new 76/76 turbonetics turbo over the winter, along with a set of 4 drag radials.