Pulling the front left tire on the motor...
#1
Moderator
Thread Starter
iTrader: (9)
Join Date: Nov 2001
Location: San Jose area
Posts: 2,902
Likes: 0
Received 0 Likes
on
0 Posts
Pulling the front left tire on the motor...
CoCouple pics of my buddy Mike driving my truck.. He has been there turning wrenchs from day one. He deserves a couple passes for sure..
Launch videos from yesterday:
http://73-ls1.com/63truck/track4-4/Launches.wmv
Some more video from today. Last one is of the 100 shot out of the hole and you can see it lift the right tire as well for a split second before it unloads the rear tire:
http://73-ls1.com/63truck/track4-4/sac4_5.wmv
I'll post some times after tomorrows runs..
Last edited by LIL SS; 04-06-2008 at 12:14 AM.
Trending Topics
#8
Moderator
Thread Starter
iTrader: (9)
Join Date: Nov 2001
Location: San Jose area
Posts: 2,902
Likes: 0
Received 0 Likes
on
0 Posts
Truck is a 63..
Here is a pass for everyone to see. This was my best and only full N20 pass. It was only the first stage (100 shot) as I poped the second stage fuse as soon as I hit the button (Tried to spray 300). I did not spray out of the hole either, closer to the 60'. I could have made one more pass but I am pushing water from the radiator when on the unit. I think I have a small leak with a head gasket and the added cyl pressure on the bottle is pushing in to the the radiator causing the cap to lift slightly.
http://73-ls1.com/63truck/track4-4/100shot.wmv
I'll be pulling the motor out and apart just to do some looking at bearings, rings, rod bolts ect just to make sure everything looks ok. I put 20 passes on it this weekend, 13 last time, 30-40 dyno pulls and lots of tunning else where.
Here is a pass for everyone to see. This was my best and only full N20 pass. It was only the first stage (100 shot) as I poped the second stage fuse as soon as I hit the button (Tried to spray 300). I did not spray out of the hole either, closer to the 60'. I could have made one more pass but I am pushing water from the radiator when on the unit. I think I have a small leak with a head gasket and the added cyl pressure on the bottle is pushing in to the the radiator causing the cap to lift slightly.
http://73-ls1.com/63truck/track4-4/100shot.wmv
I'll be pulling the motor out and apart just to do some looking at bearings, rings, rod bolts ect just to make sure everything looks ok. I put 20 passes on it this weekend, 13 last time, 30-40 dyno pulls and lots of tunning else where.