pittman

iTrader: (2)

I have video of my kid driving my truck with the 5.3 (heads-cam) running a 12.8 or 12.9 if you need it. A 12.20 or below would take some planning.
I noticed that 100 more hp dropped the sixty foot down 2 tenths on the exact same suspension/tires.

12.97 et
http://s160.photobucket.com/user/Spo...nce-1.mp4.html

12.88 et @ 105 mph

tim wellington

what you run 1/8 8.1? to 8.2? . you had to have a good converter. i am not doubting you got ur stuff together .not saying it impossible . but not as simple as people saying it is.THE WORST THING SOME BODY CAN SAY TO YOU IS (all you got to is...........) .I KNOW BECAUSE I BOUGHT MY TRUCK WITH JUST A 6.0 IN IT 11/25/12 .PEOPLE SAYING ALL YOU GOT TO DO IS BUY A TURBO .10.000$ LATER AND I AM STILL SPENDIND LOL

pittman

iTrader: (2)

No... it is not easy !! Everything has to work together or it doesn't come together as it could. TC needs to match the cam as the gearing and tires.
Heavy truck needs some torque too. The suspension needs to be set up right and then you still need some good air and track conditions.

Drag racing takes a lot of planning and money to be fast.

TXsilverado

iTrader: (19)

me: ecsb 5.7 12.19 N/A.
skeet: ecsb 6.0 11.8x N/A
AP2002: ecsb 6.0 12.39 N/A
V8: rcsb 5.3 i think he went around 12.60
bluecajun rcsb 5.3 12.3x N/A

everything has to work together. most people throw money at a project and never spend the time to tune everything to work.

fastjweb

iTrader: (2)

Tim,

My buddy Josh's truck here where I live is a lq4 with milled 243s, decent sized cam, yank ss 3600 converter and 4.56s on stock suspension with slicks ran a 7.80 something at coastal plains. He cut a 1.69 60ft I believe too. It can be done. It has the HD front clip, full rear bumper, full interior and 20's up front. he has longtubes, e-fans,and trailblazer ss intake.

pittman

iTrader: (2)

Tim, what kind of sixty foot are you getting ?
What year is your truck...newer is heavier ?
What kind of MPH are you seeing in the 1/8 and 1/4 ?
Have you been to a dyno to get the tune right (or at the track with a tuner) ?
What rwhp\tq are you seeing ?

It looks like you have all the right stuff for a beast by your list.

tim wellington

oh i have a turbo set up .i have been 7.60 in the 1/8 on 8lb of boost with old set up stock bottom lq4, turbo masterpower set up,cammed with a bad tune .have not been to track with my new precision 76/75 forged 370.

TXsilverado

iTrader: (19)

My best 1/8 time in the ECSB N/A was 7.72

heavychevy01

I went 11.8 on motor in my ecsb 5+ years ago. Low 12s many times. 1/4 mile times. 6.0 block heads cam, long tubes. 4l60 trans and stock rear. 12s can be done.

ZR1 DREAMING

iTrader: (28)

That's impressive, I don't think I've seen your times before.