Roush tvs1900 4.8
#12
TECH Fanatic
Thread Starter
iTrader: (14)
Join Date: Jul 2008
Location: flemington nj
Posts: 1,103
Likes: 0
Received 0 Likes
on
0 Posts
so i went to the track today but didnt run the truck, i was meeting up with the tuner after i left so ill prob head back down in the morning to make a couple passes. it feels STRONG though!! when he asked me to hit it the first time and it blew the tires off at 45mph and even spun when it hit 3rd i was a bit surprised. made a 60mph pull against my brothers wrx on the highway and after i hooked i pulled on him pretty good and he was just going 12.9 at 105 today at the track
#15
TECH Fanatic
Thread Starter
iTrader: (14)
Join Date: Jul 2008
Location: flemington nj
Posts: 1,103
Likes: 0
Received 0 Likes
on
0 Posts
the track results are in, as expected and a bit better then expected really. as i expected it spun bad, no more then half throttle until it was into second gear some. but i did tree a real nice c6 z06. he was runnin me down some but i got him.
60ft 2.33
1/8 8.66 @ 90.2
1/4 12.98 @ 113.4
i didnt think it would trap that high, i was having problems with the meth, it wont stay on for more then a couple seconds, but afr was a bit fat and it was cold out so i wasnt worried about it. its about mid to high 10's afr we could go leaner but he wants me to do a couple things first like switch to 2 bar map and add iat into the manifold. i think for sure on slicks i can go 11's. denmah was there with his turbo 4.8 but i didnt get to talk to him at all, i wanted to see if i could throw him some cash and use his slicks for a pass but ill just wait to get my own.
60ft 2.33
1/8 8.66 @ 90.2
1/4 12.98 @ 113.4
i didnt think it would trap that high, i was having problems with the meth, it wont stay on for more then a couple seconds, but afr was a bit fat and it was cold out so i wasnt worried about it. its about mid to high 10's afr we could go leaner but he wants me to do a couple things first like switch to 2 bar map and add iat into the manifold. i think for sure on slicks i can go 11's. denmah was there with his turbo 4.8 but i didnt get to talk to him at all, i wanted to see if i could throw him some cash and use his slicks for a pass but ill just wait to get my own.
Thread
Thread Starter
Forum
Replies
Last Post
legerwn
Tuning, Diagnostics, Electronics, and Wiring
56
11-15-2015 10:21 PM