Went to local short track last night
#1
TECH Fanatic
Thread Starter
iTrader: (3)
Join Date: Aug 2005
Location: Jxn, Miss
Posts: 1,560
Likes: 0
Received 0 Likes
on
0 Posts
Went to local short track last night
So finally after the new set up i had the ***** to put the factory 4l60 on the track behind my new setup...... Keep in mind i am running a 28x11.50 mt et street II. I was at 17psi tire pressure. I made a total of three passes trying to get it to leave and this is what i came up with:
Keep in mind this is 500 ft so add about .6 tenths for a full 1/8.
My fastest pass spinning past 330 was a 7.021......put that in the calculator with the mph i ran @ 80mph and that will be about a 7.7 1/8 and net about a 12.9 on a n/a car. We measured the "60ft" and its actually 62 ft so my 2.0 wasnt that bad just when it shifts to second i unload and break loose.
I hope with boost it is making a bigger mph and net me a better time in the 1/4!
But i am satisfied if i truly see some 12's on a real 1/4 track soon!
Keep in mind this is 500 ft so add about .6 tenths for a full 1/8.
My fastest pass spinning past 330 was a 7.021......put that in the calculator with the mph i ran @ 80mph and that will be about a 7.7 1/8 and net about a 12.9 on a n/a car. We measured the "60ft" and its actually 62 ft so my 2.0 wasnt that bad just when it shifts to second i unload and break loose.
I hope with boost it is making a bigger mph and net me a better time in the 1/4!
But i am satisfied if i truly see some 12's on a real 1/4 track soon!