Drag Racing Fastest Truck List inside, sortable for any make/model/engine listed.
TIME SLIP DATABASE

Went to the track last night....

Thread Tools
 
Search this Thread
 
Old 04-02-2009, 06:50 PM
  #1  
TECH Fanatic
Thread Starter
iTrader: (1)
 
12sec.5.3's Avatar
 
Join Date: Feb 2004
Location: Pierre Part, LA
Posts: 1,161
Received 0 Likes on 0 Posts
Default Went to the track last night....

First time out with the new setup. I had everything pretty good tuning on the street from the EFI live scan tool, AEM wideband, and the sotp meter. I get to the track and on the first pass it spun just a little and pulled a 1.67 60'. I had to let out when I looked up at the wideband and seen an AFR of 15.5. That was 15.7 at 61mph. I added fuel for the next two passes but had to let out again b/c it was still really lean. Only made one full out pass with a little spin 1.71 60' and a 12.3 at 107mph . AFR was 14.1-14.2 with a bit of detonation and only 23* timing from knock retard. I really shouldn't have ran all out but I wanted to see if it would clear up since it runs perfect on the street. Forged pistons helped out there. Gonna see if I can find out why it's leaning out only from a dead stop with traction.
Old 04-02-2009, 06:53 PM
  #2  
Baltimore Whore
iTrader: (95)
 
Mangled03gmc's Avatar
 
Join Date: Apr 2004
Location: In a van DOWN BY THE RIVER
Posts: 16,820
Likes: 0
Received 2 Likes on 2 Posts
Default

Doesn't really have to do with your fueling issue, nice 60ft btw. What slicks, suspension are you using??

Thanks
Old 04-02-2009, 06:53 PM
  #3  
TECH Senior Member
iTrader: (27)
 
GMCtrk's Avatar
 
Join Date: Jul 2004
Location: Dallas
Posts: 12,275
Received 17 Likes on 17 Posts
Default

You cut a 1.7 60' on those tires in your sig???
Old 04-02-2009, 06:56 PM
  #4  
TECH Fanatic
Thread Starter
iTrader: (1)
 
12sec.5.3's Avatar
 
Join Date: Feb 2004
Location: Pierre Part, LA
Posts: 1,161
Received 0 Likes on 0 Posts
Default

Caltracs, stock shocks, 28x11.50 Hoosier QTP's on stockers, pulled sway bar.
Old 04-02-2009, 06:58 PM
  #5  
TECH Senior Member
iTrader: (27)
 
GMCtrk's Avatar
 
Join Date: Jul 2004
Location: Dallas
Posts: 12,275
Received 17 Likes on 17 Posts
Default

what rims are you using for those slicks? Im assuming you just have 2" shackles out back?
Old 04-02-2009, 07:06 PM
  #6  
12 Second Truck Club
iTrader: (13)
 
dlt76028's Avatar
 
Join Date: Sep 2007
Location: Crowley, TX
Posts: 5,883
Received 1 Like on 1 Post
Default

nice time.. i'm hoping when i get a 60' like yours i'll get my e.t. down there too. i'm trapping 106mph with only 12.8
Old 04-02-2009, 07:06 PM
  #7  
TECH Fanatic
Thread Starter
iTrader: (1)
 
12sec.5.3's Avatar
 
Join Date: Feb 2004
Location: Pierre Part, LA
Posts: 1,161
Received 0 Likes on 0 Posts
Default

Stock cast. 2" shackles and modified hangers.
Old 04-02-2009, 07:08 PM
  #8  
Baltimore Whore
iTrader: (95)
 
Mangled03gmc's Avatar
 
Join Date: Apr 2004
Location: In a van DOWN BY THE RIVER
Posts: 16,820
Likes: 0
Received 2 Likes on 2 Posts
Default

What slicks??
Old 04-02-2009, 07:11 PM
  #9  
12 Second Truck Club
iTrader: (13)
 
dlt76028's Avatar
 
Join Date: Sep 2007
Location: Crowley, TX
Posts: 5,883
Received 1 Like on 1 Post
Default

Originally Posted by Mangled03gmc
What slicks??
post 4
Old 04-02-2009, 07:14 PM
  #10  
Baltimore Whore
iTrader: (95)
 
Mangled03gmc's Avatar
 
Join Date: Apr 2004
Location: In a van DOWN BY THE RIVER
Posts: 16,820
Likes: 0
Received 2 Likes on 2 Posts
Default

**** good call, I totally over looked that...


Quick Reply: Went to the track last night....



All times are GMT -5. The time now is 11:37 AM.