5.3 s10 dyno pull
#1
Moderator
Thread Starter
iTrader: (4)
Join Date: Nov 2008
Location: Guyton, GA
Posts: 534
Likes: 0
Received 0 Likes
on
0 Posts
5.3 s10 dyno pull
Just got back tonight from Efi Alchemy's new shop in north FL(really nice place). First pull was with one cutout open and the other close with 29* of timing. The other pull was with 28* and both cutouts open. I wanted to see what it would have put down with 29* and both cutouts open but it was getting late into the night.
Tonights graph:
This graph is one that i pulled a month or two back at a different shop, but the tunners of the shops say their dynos put out almost the exact same numbers. Seem to have lost some power somewhere?
Tonights graph:
This graph is one that i pulled a month or two back at a different shop, but the tunners of the shops say their dynos put out almost the exact same numbers. Seem to have lost some power somewhere?
#6
Moderator
Thread Starter
iTrader: (4)
Join Date: Nov 2008
Location: Guyton, GA
Posts: 534
Likes: 0
Received 0 Likes
on
0 Posts
thanks fellas...i should have some 1/4 mile time this weekend..hitting up the southern truck shootout and plan on having some good video and pics
im about to do a compression check and throw in some tr55s..what should i gap them to with my setup for best performance?
im about to do a compression check and throw in some tr55s..what should i gap them to with my setup for best performance?