6.0, sts dyno
#1
TECH Fanatic
Thread Starter
iTrader: (65)
Join Date: Jun 2006
Location: Tyndall AFB / Panama City, FL
Posts: 1,187
Likes: 0
Received 0 Likes
on
0 Posts
6.0, sts dyno
I got the truck tuned today, had some valve float above 5300 rpm so the numbers will definetly get higher when i change out the LS6 springs for something stiffer. Also the trans was slipping a bit so its only on 5 psi right now. So at 5300 and 5 psi it put down 385hp and 427tq.
#7
TECH Fanatic
Thread Starter
iTrader: (65)
Join Date: Jun 2006
Location: Tyndall AFB / Panama City, FL
Posts: 1,187
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by slowec
Holy chit!!! based off your #'s I am in the 400/450 range. CONGRATES How does it feel? how are you telling you have valve float?
How much timing are you running at wot?
How much timing are you running at wot?
Trending Topics
#9
TECH Fanatic
Thread Starter
iTrader: (65)
Join Date: Jun 2006
Location: Tyndall AFB / Panama City, FL
Posts: 1,187
Likes: 0
Received 0 Likes
on
0 Posts
its a 60-1 and the tranny is brand spankin' new so i think a shift kit will fix it up. Im not completely sure that it was tranny slip we were feeling on the dyno because i don't feel it on the street but the kit won't hurt to have.
#10
TECH Junkie
iTrader: (9)
Originally Posted by adam1803
its a 60-1 and the tranny is brand spankin' new so i think a shift kit will fix it up. Im not completely sure that it was tranny slip we were feeling on the dyno because i don't feel it on the street but the kit won't hurt to have.