ap2002

iTrader: (8)

my guess would be right at 400rwhp? but hey who knows, my 6.0 only put down 323rwhp!! but it runs its *** off at the track where it really counts!

TouchOfEvil04

iTrader: (13)

My guess is 412TQ @4700rpms and 403HP @ 5800rpms.

amadeospike

iTrader: (1)

You'll be surprised what those 6.0s can do.

lsx10

iTrader: (3)

you might be right, those auto tranmissions are hungry bitches

TurboGibbs

iTrader: (6)

I am very interested in these numbers. It will help me to decide to go back to cathedral ports or not.

dug

iTrader: (10)

the cam is a lil small but it does have ported 243 heads with high compression. Is 400rwhp that unrealistic?

GMCtrk

iTrader: (27)

im dirnk again mt v6.0 i sweak i make 250 rwho;p,

InchUp

iTrader: (2)

I'm confident that it will not make more horsepower than torque unless hirdlej winds that thing out past 7000 rpms. Above 6500+ rpms I see the truck intake manifold and the exhaust setup choking the motor anyway, which is fine IMHO. His camshaft is set up nicely though to make the engine more efficient, unlike the stock LQ4 he started with as a 325hp/365lb-ft torque monster. What he has now is more or less an LS2 that can breathe AND burn better from idle to 6500 from his head work, spot-on tune and more aggressive cam.

it's 2am or so here, hirdlej and I just got back from hunting down Mustangs and F-bodies, and now I'm gonna stick with that 410rwhp, 430rwtq guesstimate. Those 3rd gear pulls from 2500 to red line were insane.

hirdlej

iTrader: (31)

Yeah but we got beat sorta by that STI........ I kicked his *** the first run, 2nd run I should have known better. Little bastard turned something on that made him really go fast Now we're going to end up on the internet somewhere since they had a camera. I bet the first run never makes it - he musta had nitrous or adjustable boost controller. Bastard

InchUp

iTrader: (2)

We just wont speak of said STI.


What STI?