Dyno numbers.
02-23-2012, 10:57 AM
#1
TECH Enthusiast
Thread Starter
iTrader: (12)
Join Date: Feb 2010
Location: warner robins, ga
Posts: 525
Likes: 0
Received 0 Likes
on
0 Posts
Dyno numbers.
I recently had my truck dynoed truck has 3.42s an lq9 with a tbss intake, 862s with ferrea 2.02 intake and 1.57 exh valves, titanium retainers, multi angle valve job.. milled .030/ now have a 58cc combustion chamber , also has a tune. Truck is 4wd with a 4l80 an silvy ss rims 275/55/20. Truck made 283rwhp an 351ft lbs. I thought the numbers are kinda low was wondering what yall thought. I believe it was a dynamics dyno, I can make sure later today. Thanks for any thoughts.
02-23-2012, 11:03 AM
#3
TECH Senior Member
iTrader: (10)
Join Date: Oct 2004
Location: Crystal Springs, MS
Posts: 14,068
Likes: 0
Received 2 Likes
on
2 Posts
Also that dyno works best for turbo applications. It reads lower than most other dynos out there since its a load bearing type.
I only put down something like 350hp on one with a turbo lq4 on 6psi.
I only put down something like 350hp on one with a turbo lq4 on 6psi.
02-23-2012, 01:23 PM
#6
02-23-2012, 03:18 PM
#7
Baltimore Whore
iTrader: (95)
Join Date: Apr 2004
Location: In a van DOWN BY THE RIVER
Posts: 16,820
Likes: 0
Received 2 Likes
on
2 Posts
tq looks ok, but hp numbers looks only a little better then a stock 5.3 
Even with the 20's and 80, I would have though it should make more. What kinda times have you went in the 1/4?
Even with the 20's and 80, I would have though it should make more. What kinda times have you went in the 1/4?
Trending Topics
02-23-2012, 03:54 PM
#8
TECH Enthusiast
Thread Starter
iTrader: (12)
Join Date: Feb 2010
Location: warner robins, ga
Posts: 525
Likes: 0
Received 0 Likes
on
0 Posts
It hasn't ran the 1/4 since I got the 4wd working. I did a 15.3 at 93.8 with a 2.45 60ft lol, that was 2wd easing off the line so I wouldn't spin and before the heads an tbss intake. I would like to be around a 13.5 now, think I am?
02-23-2012, 04:00 PM
#9
TECH Fanatic
Join Date: Feb 2010
Location: el paso, tx
Posts: 1,245
Likes: 0
Received 0 Likes
on
0 Posts
hp def seems low, are that cam and headers in your sig installed? who did the tune? also, just curious as to what you scr is with flat top pistons and milled 5.3 heads?
02-23-2012, 04:01 PM
#10
Baltimore Whore
iTrader: (95)
Join Date: Apr 2004
Location: In a van DOWN BY THE RIVER
Posts: 16,820
Likes: 0
Received 2 Likes
on
2 Posts
Some thing is mix matched or the tune is just horrible. That truck with a stock 6.0 should go in the 14's by it self. The obs trucks are lighter then the newer ones also. Hell my truck in the sig went high 14's with a hypertech, lt's, cold air, with the 4.8.