Dynamometer Results & Comparisons Dyno Graphs | Power Comparisons | Dyno Truck List

dyno'd 5.3 with 100 shot

Thread Tools
 
Search this Thread
 
Old 04-01-2010 | 08:15 PM
  #21  
dlt76028's Avatar
12 Second Truck Club
iTrader: (13)
 
Joined: Sep 2007
Posts: 5,883
Likes: 2
From: Crowley, TX
Default

Now that I'm looking at that, that is pretty insane. You gained 87hp and 210tq??
Old 04-01-2010 | 08:17 PM
  #22  
GMCtrk's Avatar
TECH Senior Member
iTrader: (27)
 
Joined: Jul 2004
Posts: 12,275
Likes: 17
From: Dallas
Default

Hmm...seems like looking into nitrous may be a good thing. lol.
Old 04-01-2010 | 08:29 PM
  #23  
LS1TRUCKGUY's Avatar
TECH Addict
iTrader: (7)
 
Joined: Nov 2005
Posts: 2,452
Likes: 2
From: Deer Park Texas
Default

I'm with blackgmc on the pics.... post em or you will get the ban hammer!!
Old 04-01-2010 | 09:42 PM
  #24  
fastrt's Avatar
Thread Starter
11 Second Truck Club
iTrader: (48)
 
Joined: Jul 2007
Posts: 1,986
Likes: 1
From: Midlothian, Texas
Default

Originally Posted by Jake99
wow, how did u gain 200lbs of torque with a 100 shot?? not saying it didnt do that but i wanna know how? iv never seen a gain like that before. mine gained 66hp and 83tq with a hsw nozzle kit with 950psi. that seemed way low to me but i was able to gain a full sec and 9mph with it still??
plate kits hit damn hard! its night and day over a nozzle.
Originally Posted by dlt76028
Now that I'm looking at that, that is pretty insane. You gained 87hp and 210tq??
it would have been more if I had the correct bottle pressure!!
Old 04-01-2010 | 09:45 PM
  #25  
fastrt's Avatar
Thread Starter
11 Second Truck Club
iTrader: (48)
 
Joined: Jul 2007
Posts: 1,986
Likes: 1
From: Midlothian, Texas
Default

ok boys here's the pics!!!

look from driver's seat

I also have these now

Old 04-03-2010 | 02:36 PM
  #26  
LS1TRUCKGUY's Avatar
TECH Addict
iTrader: (7)
 
Joined: Nov 2005
Posts: 2,452
Likes: 2
From: Deer Park Texas
Default

Nice.... ive been wanting/needing a set of those caltracs for a while now.... is the regulator for the nitrogen bottle built into the top where the valve is? How long should the nitrogen last until you need a refill?
Old 04-03-2010 | 04:13 PM
  #27  
Phantom's Avatar
11 Second Club
iTrader: (16)
 
Joined: Sep 2006
Posts: 5,686
Likes: 23
From: The 405
Default

i seen you expect low 7s in the 1/8? think the 5.3 has 10's-11.0s in it? if so...KICK ***! gives me more hope for mine
Old 04-03-2010 | 05:16 PM
  #28  
speedygonzalez's Avatar
Teching In
 
Joined: Sep 2007
Posts: 46
Likes: 0
Default

wow, thats alot of torque gain with that 100 shot. nice #s
Old 04-03-2010 | 06:30 PM
  #29  
fastrt's Avatar
Thread Starter
11 Second Truck Club
iTrader: (48)
 
Joined: Jul 2007
Posts: 1,986
Likes: 1
From: Midlothian, Texas
Default

Originally Posted by LS1TRUCKGUY
Nice.... ive been wanting/needing a set of those caltracs for a while now.... is the regulator for the nitrogen bottle built into the top where the valve is? How long should the nitrogen last until you need a refill?
the cal-tracs are nice!! I got these for cheap! under $200. the nano bottle last just as long as the n2o bottle at a 1:1 ratio. yes the regulator is in the top of the valve that screws on the nano bottle.
Originally Posted by Phantom
i seen you expect low 7s in the 1/8? think the 5.3 has 10's-11.0s in it? if so...KICK ***! gives me more hope for mine
yeah, I would like to see 7.4-7.5, but I am also wanting to put my wcch stage 1 5.3 heads on in a few months, at ~10.5:1 compression so my goal will change then too. cold fall weather will bring better numbers.
Originally Posted by speedygonzalez
wow, thats alot of torque gain with that 100 shot. nice #s
thanks!!
Old 04-04-2010 | 02:18 AM
  #30  
bluecajun5.3's Avatar
11 Second Truck Club
iTrader: (31)
 
Joined: Jan 2005
Posts: 5,861
Likes: 0
From: Breaux Bridge, LA
Default

very nice!
7.40 should be attainable. that was my 1/8mi on my 11.74 run with the 75 shot.



All times are GMT -5. The time now is 06:40 PM.