dyno'd 5.3 with 100 shot
#31
Thread Starter
11 Second Truck Club
iTrader: (48)
Joined: Jul 2007
Posts: 1,986
Likes: 1
From: Midlothian, Texas
thanks, 7.4 and 11.7 ish are my goals for this setup, and with the heads I would like to see at least 7.2 and 11.5's. that is in 1000+ DA. if I could get ya'lls kinda da I may see lower 7's and 11's.
#33
Thread Starter
11 Second Truck Club
iTrader: (48)
Joined: Jul 2007
Posts: 1,986
Likes: 1
From: Midlothian, Texas
best n/a is 8.38 at 82mph, and 13.1x at 102mph at +900DA. the cal-tracs are used from the axle up to the front tube and joints. and new on the front plates, aluminum bushings and hardware. cost 120 for the used part and $75 for the missing parts from calverts. worked out great.
#34
best n/a is 8.38 at 82mph, and 13.1x at 102mph at +900DA. the cal-tracs are used from the axle up to the front tube and joints. and new on the front plates, aluminum bushings and hardware. cost 120 for the used part and $75 for the missing parts from calverts. worked out great.
congrats Eric!!!
#36
best n/a is 8.38 at 82mph, and 13.1x at 102mph at +900DA. the cal-tracs are used from the axle up to the front tube and joints. and new on the front plates, aluminum bushings and hardware. cost 120 for the used part and $75 for the missing parts from calverts. worked out great.