Got my truck Dyno'd - XR265HR
#1
Launching!
Thread Starter
iTrader: (3)
Join Date: Feb 2004
Location: CALIFORNIA
Posts: 235
Likes: 0
Received 0 Likes
on
0 Posts
Got my truck Dyno'd - XR265HR
I got my truck Dyno'd. It did what I expected and I am very happy with the results. Please keep in mind im rolling on 35" tires and im a 4x4. The tires caused the "low" numbers and the graph to be wavy the way it was (did not do to much smoothing). Everyone in the dyno bay was kind of scared to be in there while I was dyno'ing At the top of third gear the dyno read I was doing 160mph lol
If was on stock tires the numbers would have probably been over 300/300. Next I am doing some small mods hoping to reach over 280 hp and over 300 ft/lbs. Under drive pulley and ported TB any other suggestions?
combo:
XR265HR 212/218, .522/.529, 114LSA, Pacesetter LT's & ORY, Intake, Gibson catback. Custom tuned by me with the help the mods of hptuners message board, 12secSS, and my buddy.
notice the torque curve
272hp, 295tq
If was on stock tires the numbers would have probably been over 300/300. Next I am doing some small mods hoping to reach over 280 hp and over 300 ft/lbs. Under drive pulley and ported TB any other suggestions?
combo:
XR265HR 212/218, .522/.529, 114LSA, Pacesetter LT's & ORY, Intake, Gibson catback. Custom tuned by me with the help the mods of hptuners message board, 12secSS, and my buddy.
notice the torque curve
272hp, 295tq
#2
Excellent results! AFR is dead on! Did you have time to play with the timing, that is all I need to do with my truck to extract more power out of it. It might not be much, 5hp about. Either way, great results, I love the flat torque curve from 3200-5200 rpms.
#3
Launching!
Thread Starter
iTrader: (3)
Join Date: Feb 2004
Location: CALIFORNIA
Posts: 235
Likes: 0
Received 0 Likes
on
0 Posts
Not bad for $120 cam shaft and free ls6 springs huh?
Timing was 28* total at WOT.
I was hoping for 280hp+ and 300Tq+. What little modifications do you recommend to get there? I was thinking under drive pulley and ported Tb. What else do you think?
Timing was 28* total at WOT.
I was hoping for 280hp+ and 300Tq+. What little modifications do you recommend to get there? I was thinking under drive pulley and ported Tb. What else do you think?
#7
TECH Resident
Join Date: Jun 2005
Location: Taxachusetts
Posts: 810
Likes: 0
Received 0 Likes
on
0 Posts
congrats!
the rollers don't care what size tires you're on so they don't matter
pull it in 2nd next time- 3rd is ridiculous- it'll show like 160mph which aint real
damn good lookin truck!
the rollers don't care what size tires you're on so they don't matter
pull it in 2nd next time- 3rd is ridiculous- it'll show like 160mph which aint real
damn good lookin truck!
Trending Topics
#9
Launching!
Thread Starter
iTrader: (3)
Join Date: Feb 2004
Location: CALIFORNIA
Posts: 235
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by .T.
congrats!
the rollers don't care what size tires you're on so they don't matter
pull it in 2nd next time- 3rd is ridiculous- it'll show like 160mph which aint real
damn good lookin truck!
the rollers don't care what size tires you're on so they don't matter
pull it in 2nd next time- 3rd is ridiculous- it'll show like 160mph which aint real
damn good lookin truck!
#10
TECH Resident
Join Date: Jun 2005
Location: Taxachusetts
Posts: 810
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 86MC_SS
2nd? 0rly?