00Silv4.8

iTrader: (10)

Tease...

ZR1 DREAMING

iTrader: (28)

432hp 425lbft

TXsilverado

iTrader: (19)

man, i wish i put down some of these numbers you guys are throwing out. i didnt pick up much at peak, but i picked up as much as 40hp in other areas

12sec.5.3

iTrader: (1)

Torque?

TXsilverado

iTrader: (19)

ok here is the before and after. like i said, not much at peak but im happy overall. now its time to get it to the track and see the numbers i really care about. then its on to a ported fast 92 setup if i end up liking the cam.

BEFORE:


AFTER:

12sec.5.3

iTrader: (1)

I'm curious to see what the 20 xtra peak hp will do for you. Max torque stayed the same too. Didn't really look to see if the overall curve was higher or not. Looking good though. Good luck at the track.

53RUSSELL

iTrader: (9)

Lookes like good numbers.

TXsilverado

iTrader: (19)

i gained big torque and hp....its just not all at peak

gained roughly:

gained 5hp @5500, LOST 8 TQ @ 5500
gained 14HP @ 5750, gained 10 TQ @ 5750
gained 15HP @ 6000, gained 15 TQ @ 5750
gained 24HP @ 6250, gained 17 TQ @ 5750
gained 30HP @ 6500, gained 19 TQ @ 5750
gained 33HP @ 6750, gained 21 TQ @ 5750
gained 40HP @ 7000, gained 30 TQ @ 5750

new cams average HP between 5500 and 7000 rpm= 417 hp
new cams average TQ between 5500 and 7000 rpm=349 tq

old cams average HP between 5500 and 7000 rpm= 393.7 hp
old cams average TQ between 5500 and 7000 rpm= 334.4 tq

thats a little more research than i ever planned to do it makes me happy with the results though.

sickREDsierra

iTrader: (17)

i can see 11.9 coming n/a

i wish i could see the damned graph of that. is there anyway you could put it in a .pdf or .jpg file and email it to me?

i wanted to see the graph.

BlackGMC

iTrader: (31)

Nice gain man!