Lq4 tr224 prc stage 2.5 heads
#1
TECH Fanatic
Thread Starter
iTrader: (17)
Join Date: Jul 2007
Location: Prairieville,La
Posts: 1,139
Likes: 0
Received 0 Likes
on
0 Posts
Lq4 tr224 prc stage 2.5 heads
Finally made a trip to the dyno after the head swap. 3rd gear dyno converter locked. this is the final 2 pulls. the higher of the 2 was with the cutout open. corrected dynojet numbers. 409 hp 402 tq
Last edited by Truckshop; 08-17-2009 at 06:13 PM.
#4
Resident Retard
iTrader: (31)
Nice that is like 340-350 Tq at 3000rpm, i bet that gets the big CC movin.... Your setup is exactly what i want when i by a CrewCab.
Is that a 114 or 112 lsa on the cam? I bet you would gain a little more with alot higher lift cam but on the same duration, probably a little flater Tq curve as well..
Is that a 114 or 112 lsa on the cam? I bet you would gain a little more with alot higher lift cam but on the same duration, probably a little flater Tq curve as well..
#6
TECH Fanatic
Thread Starter
iTrader: (17)
Join Date: Jul 2007
Location: Prairieville,La
Posts: 1,139
Likes: 0
Received 0 Likes
on
0 Posts
its a tr224 on a 112. i thought about a custom cam but i dont think it would be enough of a gain for the expense. esp with as good as it runs now. it is my daily driver and won't see much track time. not to mention this stall isn't big enough. plus iat's were 105 at the beginning of the log and 99 at the end.