Nelson dyno tune on Friday, any guesses
#1
Nelson dyno tune on Friday, any guesses
Anyone wanna take a stab at some power numbers?
Full list of mods:
Engine:
346 cubic inches (5.3 block)
Stock crank
Eagle Rods
Mahle Pistons 9:1 CR
Comp Cams 224/230 around .610/.630 (1.8 rockers) 114*
Ported stock heads with bigger intake valves 295 cfm on intake side
Victor Jr. intake with intake elbows dot com elbow
stock throttle body
1-3/4 Pacesetters with ory into custom 4" Magnaflow (bullitt style)
Forced Induction:
Procharger D1sc with 3-core intercooller
Hoping for at least 9 lbs of boost with 4" pulley at 6500 rpm
Fuel System:
255lph intank
60 lb injectors
Alkycontrol Meth Kit
Drivetrain:
Level 4 4l80e from FTL
3000# Triple disk Vigilante converter
3.73 Gears w/G80
I think that about covers everything.
Full list of mods:
Engine:
346 cubic inches (5.3 block)
Stock crank
Eagle Rods
Mahle Pistons 9:1 CR
Comp Cams 224/230 around .610/.630 (1.8 rockers) 114*
Ported stock heads with bigger intake valves 295 cfm on intake side
Victor Jr. intake with intake elbows dot com elbow
stock throttle body
1-3/4 Pacesetters with ory into custom 4" Magnaflow (bullitt style)
Forced Induction:
Procharger D1sc with 3-core intercooller
Hoping for at least 9 lbs of boost with 4" pulley at 6500 rpm
Fuel System:
255lph intank
60 lb injectors
Alkycontrol Meth Kit
Drivetrain:
Level 4 4l80e from FTL
3000# Triple disk Vigilante converter
3.73 Gears w/G80
I think that about covers everything.