New Dyno #'s with new cam, VID included
#1
New Dyno #'s with new cam, VID included
Went up to the dyno today with some other guys, BTW nice to meet some of yall.
Previous setup was a 220/220 .56X/.56X @114+4 and LS6 Intake
I put down 303/300 power dropping off at 5500 ... The graph was done in MPH, but from the logs I added in RPM. 3rd gear, i believe the TC was unlocked.
New setup, 222/224 .56X/.56X @ 112+2, truck intake
I put down 316/287, The power started dropping off at 6300 ... 3rd gear TC locked
Vids
I don't know why i lost TQ, maybe something in the tuning, i dunno, but the truck runs alot stronger and I gained .2 in the 1/8th with the new setup... These were also done on different dynos...
The log is also attached ... Timing was a little bit higher than i expected...
Next up are a set of PRC 5.3 58cc 2.5 stage heads ....
Previous setup was a 220/220 .56X/.56X @114+4 and LS6 Intake
I put down 303/300 power dropping off at 5500 ... The graph was done in MPH, but from the logs I added in RPM. 3rd gear, i believe the TC was unlocked.
New setup, 222/224 .56X/.56X @ 112+2, truck intake
I put down 316/287, The power started dropping off at 6300 ... 3rd gear TC locked
Vids
I don't know why i lost TQ, maybe something in the tuning, i dunno, but the truck runs alot stronger and I gained .2 in the 1/8th with the new setup... These were also done on different dynos...
The log is also attached ... Timing was a little bit higher than i expected...
Next up are a set of PRC 5.3 58cc 2.5 stage heads ....
Last edited by BlackGMC; 01-10-2009 at 02:33 PM.