04 4.8L 5MT RCSB SC build
07-27-2013 | 09:13 AM
#13
Thread Starter
Teching In
Joined: Jan 2013
Posts: 29
Likes: 0
It's been a while since I last posted. Since my last post, I've had the following work done.
License plate flip up kit and tow hitch installed.
Eaton posi rear end
Swapped 3.41 stock gears for a set of 3.73's
Stage 3 Centerforce clutch
Corsa side exit catback exhaust just came yesterday as well as my 3.4" pulley. Replacing the 4.1" pulley.
I also picked up a set of factory steel exhaust header gaskets and new bolts. The cork garbage that came with the PaceGhettos already took a dump so hopefully they fix the leak.
Ordered cam, valves, lifters, oil pump
and E-fan kit.
The above will be installed starting on Aug 1
License plate flip up kit and tow hitch installed.
Eaton posi rear end
Swapped 3.41 stock gears for a set of 3.73's
Stage 3 Centerforce clutch
Corsa side exit catback exhaust just came yesterday as well as my 3.4" pulley. Replacing the 4.1" pulley.
I also picked up a set of factory steel exhaust header gaskets and new bolts. The cork garbage that came with the PaceGhettos already took a dump so hopefully they fix the leak.
Ordered cam, valves, lifters, oil pump
and E-fan kit.
The above will be installed starting on Aug 1
07-29-2013 | 03:25 AM
#16
Thread Starter
Teching In
Joined: Jan 2013
Posts: 29
Likes: 0
Currently I'm running about 5-6 lbs of boost. Very safe level you don't even hear the blower ever lol. With the pulley swap I'm hoping to get to about 11-12#'s.
Yep that's on the list of parts going in starting Aug 1. Also installing an 80mm TB.
I'll definitely be posting up some pics.
Yep that's on the list of parts going in starting Aug 1. Also installing an 80mm TB.
I'll definitely be posting up some pics.
Thread
Thread Starter
Forum
Replies
Last Post
