'09 Silv, MP45 Iron 5.7L
#1
Performance Trucks Sponsor
Thread Starter
iTrader: (5)
Join Date: Jul 2002
Location: san antonio, tx
Posts: 1,439
Likes: 0
Received 0 Likes
on
0 Posts
'09 Silv, MP45 Iron 5.7L
We finished this truck just before the race, well at least this stage.
It's an '09 Silverado, base model v6, converted to Iron block 5.7, MP45, our twin log into one design, 4" dp, 4L60e for now, stock rear, NO POSI.
We also dumped the drive by wire and converted it to a dbc using a 2002 fbody pcm and our custom engine harness.
We didn't have time to install the posi, but at the track with one leg, on 8psi, it ran a 11.5 @126 with a 2.0 60ft.
Like we all say hahaha, it has more in it, but that was the first time out.
Posi is in and boost is up to 14psi now.
Shooting for a mid 10sec.
Not looking to break any records with this truck, but it's a damn nice daily driver, gets good mileage, the ride is awesome thanks to the McGaughy 4/7 drop.
We'll see what it does this week.
We still need to install the proximity detector for the auto doors and ignition, but we went ahead and installed the push button, pretty cool I think.
Later mods include a full cage, better rearend.
more pics: http://www.ls1truck.com/newstorage/p...rbobuild/Done/
entire build: http://www.ls1truck.com/newstorage/p...do-Turbobuild/
Video of start up and all gauges working!:
http://www.ls1truck.com/newstorage/v...rnandodone.wmv
It's an '09 Silverado, base model v6, converted to Iron block 5.7, MP45, our twin log into one design, 4" dp, 4L60e for now, stock rear, NO POSI.
We also dumped the drive by wire and converted it to a dbc using a 2002 fbody pcm and our custom engine harness.
We didn't have time to install the posi, but at the track with one leg, on 8psi, it ran a 11.5 @126 with a 2.0 60ft.
Like we all say hahaha, it has more in it, but that was the first time out.
Posi is in and boost is up to 14psi now.
Shooting for a mid 10sec.
Not looking to break any records with this truck, but it's a damn nice daily driver, gets good mileage, the ride is awesome thanks to the McGaughy 4/7 drop.
We'll see what it does this week.
We still need to install the proximity detector for the auto doors and ignition, but we went ahead and installed the push button, pretty cool I think.
Later mods include a full cage, better rearend.
more pics: http://www.ls1truck.com/newstorage/p...rbobuild/Done/
entire build: http://www.ls1truck.com/newstorage/p...do-Turbobuild/
Video of start up and all gauges working!:
http://www.ls1truck.com/newstorage/v...rnandodone.wmv
#5
Performance Trucks Sponsor
Thread Starter
iTrader: (5)
Join Date: Jul 2002
Location: san antonio, tx
Posts: 1,439
Likes: 0
Received 0 Likes
on
0 Posts
Ya really tell me about it, it's hard to launch due to traction and one tire fire, but once it gets out there, it's gone! especially on such low boost.
here was a 124mph run.
http://www.youtube.com/watch?v=Q2ilWb3zI_8
http://www.youtube.com/watch?v=s09H6RcTrME
http://www.youtube.com/watch?v=QoDsO0X8x4M
http://www.youtube.com/watch?v=LICQFkhLWgA
http://www.youtube.com/watch?v=4njs2gPLsgA
http://www.youtube.com/watch?v=URxO3_pwCgM
darn transmission line let go, nothing serious, now upgraded to good parts.
http://www.youtube.com/watch?v=iieLojUSWuY
here was a 124mph run.
http://www.youtube.com/watch?v=Q2ilWb3zI_8
http://www.youtube.com/watch?v=s09H6RcTrME
http://www.youtube.com/watch?v=QoDsO0X8x4M
http://www.youtube.com/watch?v=LICQFkhLWgA
http://www.youtube.com/watch?v=4njs2gPLsgA
http://www.youtube.com/watch?v=URxO3_pwCgM
darn transmission line let go, nothing serious, now upgraded to good parts.
http://www.youtube.com/watch?v=iieLojUSWuY
Trending Topics
#9
Performance Trucks Sponsor
Thread Starter
iTrader: (5)
Join Date: Jul 2002
Location: san antonio, tx
Posts: 1,439
Likes: 0
Received 0 Likes
on
0 Posts
oh, to unlock the doors like the vettes, when you get close to it, but we'll take it a step further and turn the ignition on as well.
if push button isn't pushed in x secs, ign will turn off.