'09 Silv, MP45 Iron 5.7L
#11
TECH Fanatic
iTrader: (14)
Join Date: Jul 2008
Location: flemington nj
Posts: 1,103
Likes: 0
Received 0 Likes
on
0 Posts
thanks, actually now we're gonna see how fast it'll go on low boost first, but with more timing and racegas.
oh, to unlock the doors like the vettes, when you get close to it, but we'll take it a step further and turn the ignition on as well.
if push button isn't pushed in x secs, ign will turn off.
oh, to unlock the doors like the vettes, when you get close to it, but we'll take it a step further and turn the ignition on as well.
if push button isn't pushed in x secs, ign will turn off.
truck is nasty on the low boost. id love to pick up a bare bones truck and do what you did here
#12
Performance Trucks Sponsor
Thread Starter
iTrader: (5)
Join Date: Jul 2002
Location: san antonio, tx
Posts: 1,439
Likes: 0
Received 0 Likes
on
0 Posts
I think we're there with more launching practice and if we actually stay in it all the way down.
Ok, update, took it last night, did two test runs.
The first was just 13.0 to check a/f ratio and shakedown pass.
Keep in mind I was trying to keep from the 11's due to no cage.
Second run, launch decent 1.7 60', tried to slow down at the end, ran a 11.4 @ 87mph lol on accident.
Last run, launch too hard and spun bad off the line, just another easy pass at 12.2.
Tried to go for one glory run before they noticed, someone soiled the track, down for the night!!!
Good news though, nothing broke, going next wed possibly.
added:
I did run the 1/8 mile, maybe some of the track gurus here can calculate it for me.
1/8 mile:
1.70 60ft (1psi launch)
7.00 1/8mile
103.8 mph 1/8mile
Ok, update, took it last night, did two test runs.
The first was just 13.0 to check a/f ratio and shakedown pass.
Keep in mind I was trying to keep from the 11's due to no cage.
Second run, launch decent 1.7 60', tried to slow down at the end, ran a 11.4 @ 87mph lol on accident.
Last run, launch too hard and spun bad off the line, just another easy pass at 12.2.
Tried to go for one glory run before they noticed, someone soiled the track, down for the night!!!
Good news though, nothing broke, going next wed possibly.
added:
I did run the 1/8 mile, maybe some of the track gurus here can calculate it for me.
1/8 mile:
1.70 60ft (1psi launch)
7.00 1/8mile
103.8 mph 1/8mile
#19
Performance Trucks Sponsor
Thread Starter
iTrader: (5)
Join Date: Jul 2002
Location: san antonio, tx
Posts: 1,439
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for responses, I think it'll have a little more in it, drove it some more and tuned it more aggressively.
I'm keeping it on low boost until it hits 10's.
Trying again this weekend.
Sure will.
it's in the typical spot, right off the Y, where the two sides join.
I'm keeping it on low boost until it hits 10's.
Trying again this weekend.
it's in the typical spot, right off the Y, where the two sides join.
#20
TECH Resident
iTrader: (18)
Join Date: Mar 2005
Location: Hattiesburg, Mississippi
Posts: 772
Likes: 0
Received 0 Likes
on
0 Posts
Man seeing this makes me feel good about you currently doing my tune... Im taking out the 4.10s and going with the 3.23s you recommended.. Hope to get them in this week with my pcm from ya and see if I can find that missing pull... Thanks Allen, keep it up!