1000hp fuel system options?
#1
TECH Fanatic
Thread Starter
iTrader: (26)
Join Date: Aug 2008
Location: Where our street cars are faster than your racecars..Mississippi
Posts: 1,113
Likes: 0
Received 0 Likes
on
0 Posts
1000hp fuel system options?
i originally bought 2-Walbro 255's and Deka 80#er's for my turbo truck... i put the 2-255's in the stock bucket (return system).. but i have heard you have to run ALOT of fuel to not starve the pumps on take off....
so i would like to go to a fuel cell... but should i keep my Walbro's or sell the set-up and go to a single Magnafuel pump ether 4301 or 4302?
or what would ya'll suggest for me...
so i would like to go to a fuel cell... but should i keep my Walbro's or sell the set-up and go to a single Magnafuel pump ether 4301 or 4302?
or what would ya'll suggest for me...
#5
TECH Fanatic
iTrader: (11)
Join Date: Dec 2009
Location: Birmingham, AL
Posts: 1,573
Likes: 0
Received 0 Likes
on
0 Posts
what i told you is the setup im running and i love it and am VERY happy i went that way instead of messing with any of the stock stuff. and i still have the stock bucket with a fuel gauge
Trending Topics
#9
TECH Addict
iTrader: (25)
Join Date: Dec 2004
Location: southern california
Posts: 2,913
Likes: 0
Received 0 Likes
on
0 Posts
the ones i posted are all i have , ive been pretty stingy with timing as in that run max was only 13 . trying to get a few things straight before i blow a bunch of money on the awd dyno thats about an hour away. its a dyna pak , i need to have everything in line as well as a turbo controller . i may need to also change waste gate springs as im not sure what exactly is in it. boost stays pretty constant at 15 psi but had a little spike of 17 with the 6k rpms pull. so not sure if im outflowing the wastegates but that would be very impressive. i want to set it at 12-14 psi street and 20-22 strip depending on where im at power wise.