408 with M122
#12
I have the MP122HH Inlet Forward/Rear Drive that was putting out 15psi on Supersubs 427 LSX w/L92 Heads. This MP122HH has about 1500 miles on it when pulled off. We pulled this off to use his engine as a tester for a new design on the TVS2300 Inlet Forward/Rear Drive. This is a Silver MP122HH just like the Polished MP122HH on my TBSS at 16.5 psi of boost with a 3.1 pulley right now. I will include a brand new Accessory Box with this supercharger. You will need the complete 8 Rib Pulley System that I can order and ship at the same time if the customer wishes. This is not able to be driven with a 6 rib belt in this configuration.
Here is a picture of mine, there were only 2 built like this from us. I will open the box and take some pictures of it tomorrow and post them here.
Here is a picture of mine, there were only 2 built like this from us. I will open the box and take some pictures of it tomorrow and post them here.
Last edited by leftcoast32; 04-02-2009 at 09:34 PM.
#13
TECH Apprentice
Thread Starter
Join Date: Jul 2005
Location: Utica, MI
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
Man, great feedback from everyone!!! Thanks guys!
I didn't blow my engine, but my oil pressure is real low right now at a hot idle. I opened up the oil filter a couple of days ago and I have a bunch of metal in there. I think I spun a cam bearing judging from the debris and some research. No knocking or anything yet, but a little noisier then usual and on borrowed time......
I didn't blow my engine, but my oil pressure is real low right now at a hot idle. I opened up the oil filter a couple of days ago and I have a bunch of metal in there. I think I spun a cam bearing judging from the debris and some research. No knocking or anything yet, but a little noisier then usual and on borrowed time......
#14
TECH Apprentice
Thread Starter
Join Date: Jul 2005
Location: Utica, MI
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
THat is a work of art! I would love to have that, but can imagine the cost of that setup after getting the 8 rib and all of that.....
I have the MP122HH Inlet Forward/Rear Drive that was putting out 15psi on Supersubs 427 LSX w/L92 Heads. This MP122HH has about 1500 miles on it when pulled off. We pulled this off to use his engine as a tester for a new design on the TVS2300 Inlet Forward/Rear Drive. This is a Silver MP122HH just like the Polished MP122HH on my TBSS at 16.5 psi of boost with a 3.1 pulley right now. I will include a brand new Accessory Box with this supercharger. You will need the complete 8 Rib Pulley System that I can order and ship at the same time if the customer wishes. This is not able to be driven with a 6 rib belt in this configuration.
Here is a picture of mine, there were only 2 built like this from us. I will open the box and take some pictures of it tomorrow and post them here.
Here is a picture of mine, there were only 2 built like this from us. I will open the box and take some pictures of it tomorrow and post them here.
Thread
Thread Starter
Forum
Replies
Last Post