Another turbo setup - NFM
#14
Performance Trucks Sponsor
Thread Starter
iTrader: (5)
Join Date: Jul 2002
Location: san antonio, tx
Posts: 1,439
Likes: 0
Received 0 Likes
on
0 Posts
Ya, we're selling this kit, we have a few out there, they are performing great!
This isn't altons kit, just used his truck for mockup, but he did switch over to our kit from the log style, he's running the kit similar to my avalanche with the MP70.
#15
11 sec. Truck Mod
iTrader: (12)
Ya, with the right elbow you can fit it, but the customer said he didn't mind running a mesh screen on the front. I'm assuming it's a race truck.
Ya, we're selling this kit, we have a few out there, they are performing great!
This isn't altons kit, just used his truck for mockup, but he did switch over to our kit from the log style, he's running the kit similar to my avalanche with the MP70.
Ya, we're selling this kit, we have a few out there, they are performing great!
This isn't altons kit, just used his truck for mockup, but he did switch over to our kit from the log style, he's running the kit similar to my avalanche with the MP70.
#17
Performance Trucks Sponsor
Thread Starter
iTrader: (5)
Join Date: Jul 2002
Location: san antonio, tx
Posts: 1,439
Likes: 0
Received 0 Likes
on
0 Posts
Plus, turbos aren't our primary service, tuning is, so I have to try and stay on top of that.
btw, the latest kit was on a 5.3L, ext cab, 2004, 2wd, 8psi, ran 13.9 on street tires. Really needs traction, but a good start.
you probably know him, it's anthony, the kid who used to work here, he finally got one!
#20
Performance Trucks Sponsor
Thread Starter
iTrader: (5)
Join Date: Jul 2002
Location: san antonio, tx
Posts: 1,439
Likes: 0
Received 0 Likes
on
0 Posts
Right now it's around $3900 for the complete kit, but it's a diy kit, meaning, you'll need to bolt in the heat exchanger yourself and the intercooler, but it's very straight forward. If you're installing a turbo, you can definitely handle the mounting. Other than that, it's very easy to install!
here are some more pics of the build:
http://www.ls1truck.com/newstorage/p...turbo/stageII/