Anyone know if these pulley's will work?
#1
On The Tree
Thread Starter
Join Date: Jan 2006
Location: Renton, WA
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
Anyone know if these pulley's will work?
Just curious if these will work with the whipple that's on my truck? Edit: and does anyone know what size is stock on my model?
NON SPONSOR LINK
NON SPONSOR LINK
Last edited by moregrip; 10-22-2006 at 01:41 PM.
#2
Originally Posted by foxySS
Just curious if these will work with the whipple that's on my truck? Edit: and does anyone know what size is stock on my model?
NON SPONSOR LINK
NON SPONSOR LINK
Last edited by moregrip; 10-22-2006 at 01:42 PM.
#3
On The Tree
Thread Starter
Join Date: Jan 2006
Location: Renton, WA
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, I used the calipers and could see it was close to 4". Didn't know what part they measure from though to get the the size. Just wondering why it's so difficult to find pulleys for our setup.
#5
Originally Posted by 91_bowtie
Whipple is the only source that I've found. What size are you looking for? I'll be getting rid of my 4" pulley in the next month or so. 12 psi here I come.
#7
Staging Lane
Join Date: Sep 2006
Location: Central FL
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
whipple pulley
Yes - Whipple is the only place I have found them also.
For every change in diameter of 1/8 inch- it changes 1 lb of boost.
Stock should have been 4 3/8 or 6 psi on a 2300 axo unit
So a 4 inch will make 7.5 psi
I have if needed...
4 3/8-6psi
4 1/4 -6.5psi
3 7/8-8.0psi
Hope this helps
For every change in diameter of 1/8 inch- it changes 1 lb of boost.
Stock should have been 4 3/8 or 6 psi on a 2300 axo unit
So a 4 inch will make 7.5 psi
I have if needed...
4 3/8-6psi
4 1/4 -6.5psi
3 7/8-8.0psi
Hope this helps
Trending Topics
#9
Launching!
iTrader: (5)
Join Date: Mar 2005
Location: KC
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TahoeSS01
Yes - Whipple is the only place I have found them also.
For every change in diameter of 1/8 inch- it changes 1 lb of boost.
Stock should have been 4 3/8 or 6 psi on a 2300 axo unit
So a 4 inch will make 7.5 psi
I have if needed...
4 3/8-6psi
4 1/4 -6.5psi
3 7/8-8.0psi
Hope this helps
For every change in diameter of 1/8 inch- it changes 1 lb of boost.
Stock should have been 4 3/8 or 6 psi on a 2300 axo unit
So a 4 inch will make 7.5 psi
I have if needed...
4 3/8-6psi
4 1/4 -6.5psi
3 7/8-8.0psi
Hope this helps
If you don't mind me asking... What did whipple charge you for the pulleys? When did you purchase them? I've seen a range of $60-140 for each pulley. I was the 140.
#10
Staging Lane
Join Date: Sep 2006
Location: Central FL
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 91_bowtie
Ideally yes; but the cam, exhaust, etc. will make the numbers sway a little. This is being discussed more in the thread about adding headers in this section.
If you don't mind me asking... What did whipple charge you for the pulleys? When did you purchase them? I've seen a range of $60-140 for each pulley. I was the 140.
If you don't mind me asking... What did whipple charge you for the pulleys? When did you purchase them? I've seen a range of $60-140 for each pulley. I was the 140.