Bad MAF?
#1
Launching!
Thread Starter
iTrader: (4)
Join Date: Oct 2007
Location: Gillette,WY
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
Bad MAF?
Drove it on a trip this past weekend. AFR's were good for about the first hour then went south. It was in the 9's to 10's going down the highway, no boost, 5-6 inches of vacuum. Then it went the other way about a half hour later, way lean. This thing is driving me nuts!! Could a bad MAF cause this or something else like the regulator?? I pulled the vacuum line from the regulator and it was dry. This thing has been nothing but problems for me. Any help would be great.
#4
Launching!
Thread Starter
iTrader: (4)
Join Date: Oct 2007
Location: Gillette,WY
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
Yes I believe it is a 1 bar set up. It still has the factory MAP and MAF in it. Black Bear did the tune. Not too familiar with tuning. And when I get in it it goes lean. This thing is driving me nuts. I dont want to throw a bunch of money at either to try and figure it out. Im waiting till after Christmas to do the AutoCal with Justin. Hopefully he can get this figured out. Someone from work told me to buy a bigger MAF, a Hitachi brand and wire it in the same as whats stock. Says the MAF is way to small for the application.